UAD Grandstream HT-488

From Bicom Systems Wiki

Introduction - How to use Grandstream HT-488 with PBXware

This "How to" is written to as general guide on how to use Grandstream HT-488 with PBXware using 1.0.2.16 Grandstream HT-488 firmware. It tries to cover most common tasks required to be set in order to have Grandstream HT-488 working efficiently.


Grandstream HT-488


Registering Grandstream HT-488

Requirements

1. Grandstream HT-488 firmware.

- Make sure that device is loaded with 1.0.2.16 firmware.

2. DHCP server.

- Fully configured and operational DHCP server.


Manual Configuration

UAD Settings

STEP ONE: PBXware IP address.

1. Find out the IP address of PBXware server.

STEP TWO: Login into PBXware.

1. Open a new browser window and enter the IP address to access the PBXware administration interface login screen.

Example: http://192.168.1.2

UAD Settings

an example with IP address

2. Hit "Enter" on your keyboard.

3. Login to PBXware with your e-mail address and password.

UAD Settings

STEP THREE: UAD status.

1. Make sure the UAD is enabled. To check the UAD status navigate to "Settings:UAD", and click on the "edit" icon corresponding to "Grandstream HT-488".

UAD Settings

2. Make sure "Status" is set to "active", "Auto provisioning" is set to "No" and "DHCP" is set to "Yes".

UAD Settings

3. Click on the "Save" button to save changes.


Creating Extension

STEP ONE: Add Extension.

1. Navigate to "Extensions". Click on "Add Extension".

Creating Extension

2. The standard options window will be shown below.

Creating Extension

3. Select Grandstream HT-488 from "UAD" select box.

4. Select Location: "Local" or "Remote".

Note:

-"Local" is for all extension registered on LAN.

-"Remote" is for all extension registered from remote networks, WAN, Internet etc.

Creating Extension

5. Click on the "Next" button.

STEP TWO: Extension values.

1. Enter values into the required field text boxes.

REQUIRED FIELDS:

Name:

Enter a name of the extension being created. Example: John Doe.


E-mail:

Enter the e-mail address associated with this extension. This e-mail address will receive all system notification messages. Example: john@domain.com


Creating Extension/Extensions Add

an example with details filled in

2. Click on "Save" button.


Creating Extension/Extensions Edit

an example with details filled in


3. Click on the "Save & E-mail". Account details will be sent to the e-mail address associated with this extension.

OPTIONAL FIELDS:

Extension:

An auto-generated extension number based on the next available sequential number. An extension value can be changed. Example: 1000.


Username:

Username is auto generated/populated and cannot be changed since it allows the system to use this value for other important operations.


Secret:

A secret value associated with the UAD is auto-generated in order to allow the UAD to successfully register with the system. The secret value can be changed.


PIN:

An auto-generated PIN will allow access to voicemail and online self care.


Registering ATA

STEP ONE: Electricity and Ethernet.

- Grandstream HT-488 needs electricity, so, plug the adapter into its jack, then connect it to the electricity network.

- Connect ethernet port to a hub, router or switch as to access LAN.

Registering ATA

After successfully connecting your Grandstream HT-486 to the electricity and data networks it is time to register it to Grandstream HT-488.

STEP TWO: Grandstream HT-488 IP address.

Find out the IP address of Grandstream HT-488 connected to network.

1. Dial ***.

2. Dial 02.

STEP THREE: Grandstream HT-488 Web Interface.

1. Open a new browser window and enter the IP address in order to access the administration interface.

Example: http://192.168.1.101

Registering ATA

an example with IP address

2. Hit "Enter" on your keyboard.

STEP FOUR: Configuring Grandstream HT-488.

1. Login to the Grandstream HT-488 web interface. The factory default password is lower case "admin".

Registering ATA

2. Click on "FXS PORT1" link.

Registering ATA

3. Enter following details into the respective fields.

REQUIRED FIELDS:

Sip Server

IP address of Grandstream HT-488 server. Example: 192.168.1.2


SIP User ID

Grandstream HT-488 extension number. Example: 1000.


Authenticate Password

The Secret of the extension as received in the e-mail associated with this extension. Example: 3dX3r5

Registering ATA

an example with details filled in

OPTIONAL FIELDS:


Outbound Proxy

Usually the same IP address as for SIP Server. Example: 192.168.1.2


Authenticate ID

Usually the same number as for SIP User ID.


Name

Example: John Doe, Reception, Entrance Main, Agent One etc.

Other fields

Other "options" or "fields" you should left blank or as it is by default, they have not importance for registering Grandstream HT-488 to PBXware.

4. Navigate down and click on "Update" button.

Registering ATA

5. Click on "Reboot" button. Grandstream HT-488 will reboot for changes to take effect.

Registering ATA

- Conclusion: If everything is done as above described you should have successfully registered Grandstream HT-488 to PBXware. Dial *123 to verify registration.

- For further information please contact the manufacturer or check their web site www.grandstream.com.


Auto Provisioning

UAD Settings

STEP ONE: PBXware IP address.

1. Find out the IP address of PBXware server.

STEP TWO: Login into PBXware.

1. Open a new browser window and enter the IP address to access the PBXware administration interface login screen.

Example: http://192.168.1.2

UAD Settings

an example with IP address

2. Hit "Enter" on your keyboard.

3. Login to PBXware with your e-mail address and password.

UAD Settings

STEP THREE: UAD status.

1. Make sure the UAD is enabled. To check the UAD status navigate to "Settings:UAD", and click on the "edit" icon corresponding to "Grandstream HT-488".

UAD Settings

2. Make sure "Status" is set to "active", "Auto provisioning" is set to "No" and "DHCP" is set to "Yes".

UAD Settings

3. Click on the "Save" button to save changes.


Creating Extension

STEP ONE: Add Extension.

1. Navigate to "Extensions". Click on "Add Extension".

Creating Extension

2. The standard options window will be shown below.

Creating Extension

3. Select Grandstream HT-488 from "UAD" select box.

4. Select Location: "Local" or "Remote".

Note:

-"Local" is for all extension registered on LAN.

-"Remote" is for all extension registered from remote networks, WAN, Internet etc.

Creating Extension

5. Click on the "Next" button.

STEP TWO: Extension values.

1. Enter values into the required field text boxes.

REQUIRED FIELDS:

Name:

Enter a name of the extension being created. Example: John Doe.


E-mail:

Enter the e-mail address associated with this extension. This e-mail address will receive all system notification messages. Example: john@domain.com


Auto provisioning:

Set to "Yes".


MAC Address:

Grandstream HT-488 MAC address. Example: 001646f5f797

Creating Extension

an example with details filled in

2. Click on "Save" button.

Creating Extension

an example with details filled in

3. Click on the "Save & E-mail". Account details will be sent to the e-mail address associated with this extension.

OPTIONAL FIELDS:

Extension:

An auto-generated extension number based on the next available sequential number. An extension value can be changed. Example: 1000.


Username:

Username is auto generated/populated and cannot be changed since it allows the system to use this value for other important operations.


Secret:

A secret value associated with the UAD is auto-generated in order to allow the UAD to successfully register with the system. The secret value can be changed.


PIN:

An auto-generated PIN will allow access to voicemail and online self care.


Registering ATA

STEP ONE: Electricity and Ethernet.

- Grandstream HT-488 needs electricity, so, plug the adapter into its jack, then connect it to the electricity network.

- Connect ethernet port to a hub, router or switch as to access LAN.

Registering ATA

After successfully connecting your Grandstream HT-486 to the electricity and data networks it is time to register it to Grandstream HT-488.

"TFTP Server" must be set with TFTP server value.

STEP TWO: Grandstream HT-488 IP address.

Find out the IP address of Grandstream HT-488 connected to network.

1. Dial ***.

2. Dial 02.

STEP THREE: Grandstream HT-488 Web Interface.

1. Open a new browser window and enter the IP address in order to access Grandstream HT-488 administration interface.

Example: http://192.168.1.101

Registering ATA

an example with IP address

2. Hit "Enter" on your keyboard.

STEP FOUR: Configuring TFTP server.

1. Login into Grandstream HT-488 web interface. The factory default password is lower case "admin".

Registering ATA

2. Click on "BASIC SETTINGS" link.

Registering ATA

3. Static IP must be set.

- Select "statically configured as" button.

- IP Address: enter an IP. Example: 192.168.1.111

- Please make sure that Grandstream HT-488 static IP do not conflict with an IP of another device on the same network.


Registering ATA

4. Click on "Update" button to save changes.

Registering ATA

5. Click on "ADVANCED SETTINGS" link.

Registering ATA

6. Navigate down to "Firmware Upgrade".

- TFTP Server" must be set with TFTP server value. Example: 192.168.1.2

Auto Configuration

an example with details filled in

7. Navigate down and click on "Update" button.

Registering ATA

8. Click on "Reboot" button. Grandstream HT-488 will reboot for changes to take effect.

Registering ATA

- Conclusion: If everything is done as above described you should have successfully registered Grandstream HT-488 to PBXware. Dial *123 to verify registration.

- For further information please contact the manufacturer or check their web site www.grandstream.com.


Auto Provisioning

Requriements

1. Make sure your devices are properly connected to the same LAN as your PBXware.

2. Make sure that all devices are set to Factory Defaults.

3. Make sure that all devices are using port 5060.


Glossary

- DHCP = Dynamic Host Configuration Protocol (DHCP) is a communications protocol that lets network administrators manage and automate the assignment of Internet.

- HUB = A common connection point for devices in a network.

- IP Address = Internet Protocol address.

- Local = A local area network (LAN) is a computer network covering a local area, like a home, office or small group of buildings such as a college.

- LAN = Local Area Network.

- PIN = Personal Identification Number.

- Remote = Network devices that are managed or controlled from a network system other than the system to which they are directly connected.

- Router = A device that forwards data packets from one local area network (LAN) or wide area network (WAN) to another.

- Switch = Network device that selects a path or circuit for sending a unit of data to its next destination.

- TFTP = Trivial File Transfer Protocol. A very simple form of the File Transfer Protocol. TFTP provides no security features.

- UAD = User Agent Device.

- VoiceMail = The electronic transmission of voice messages over the Internet. The messages are stored on a computer until the recipient accesses and listens to them.

- WAN = Wide Area Network.

- Web Interface = A web interface is the system of controls with which the user controls a device.