Yealink T46S

From Bicom Systems Wiki

Introduction

Yealink T46S User Guide

This Configuration Guide is written as general guide on how to configure the Yealink phone model SIP-T46S to work with PBXware 4.1.

Yealink T46S supported features:

  • Multiple VoIP accounts
  • Auto provision via TFTP/HTTP/HTTPS
  • Call hold, mute, DND
  • Call forward, call waiting, call transfer
  • Redial, call return, auto answer
  • 3-way conferencing
  • Dial plan, XML Browser
  • Codecs:G.722, G.711(A/u), Opus, G.729AB, G.723, G.726,iLBC
  • XML/LDAP remote phonebook
  • Call history:dialed/received/missed/forwarded
  • Busy Lamp Field (BLF)
  • Anonymous call, anonymous call rejection
  • Hot-desking, music on hold
  • Voice mail
  • Call park, call pickup
  • Intercom, paging
  • Transport Layer Security (TLS)
  • SRTP for voice
  • Time and date synchronization using SNTP
  • DTMF: In-band, Out-of-band (RFC2833) and SIP INFO
  • IP assignment: static/DHCP/PPPoE


Video Tutorial

Video tutorial explaining Auto Provisioning setup for Yealink Phone on PBXware 4.

Video tutorial explaining Auto Provisioning setup for Yealink Phone on PBXware 5.


Requirements

Identifying phone model

To start and successfully complete registration of your Yealink phone you need to know which phone model you will setup.

From the back of each Yealink phone there are exact model information that you should check. Although different phone models can have exactly the same requirements and installation procedure, phone models can also have significantly different requirements and installation procedure, so that ignorance of your own model may result in the inability to successfully set up your phone.

Phone firmware

  • Make sure that your phone is loaded with appropriate firmware version,66.81.x.x.
  • To find out the firmware version of your Yealink phone model open a new browser window and enter your phone IP address in order to access the phone web administration interface login screen. Example: http://192.168.1.22.
  • Login to phone web administration interface with your username and password. Please note, factory default login details are username: admin and password: admin.

DHCP server

Fully configured and operational DHCP server.

PBXware version

PBXware version 4.1.3.0

In order to find out the PBXware version:

  • Login to PBXware
  • Navigate to Settings: About.

On the top of About page is a code similar to this one PBXware Edition: Business, Release: 4.1.3.0 (387597b7), Running: 1.8.32.1-gc-b47edc45, PBXware Proxy v4.1.3 (62b7bcd), API: 4.1, libmemcached version: 1.0.14, where Release denotes the exact version of your PBXware.


Installation

This chapter describes how to install and connect the phone to the electrical power and data network as well as how to apply factory settings.

The following topics are covered:

  • Power adapter
  • Power over Ethernet (PoE)
  • Factory Settings

Power adapter

Connect the Network and Power

  • Connect the DC plug on the power adapter to the DC port on the phone and connect the other end of the power adapter into an electrical power outlet.
  • Connect the ethernet cable between the Internet port on the phone and the network port on a router or switch to access LAN.

NOTE: If you are using Power over Ethernet (PoE), you don't need to connect the AC adapter. Make sure the Ethernet cable and router or switch is Power over Ethernet (PoE) compliant.

Power over Ethernet (PoE)

Connect the Network (only)

Using a regular ethernet cable, your phone can be powered from a Power over Ethernet (PoE) compliant router or switch.

  • Connect the Ethernet cable between the Internet port on the phone and an available port on the in-line power router or switch.

NOTE: If you are using Power over Ethernet (PoE), you don't need to connect the AC adapter. Make sure the Ethernet cable and router or switch is Power over Ethernet (PoE) compliant.

Find the phone IP address

Find out your Yealink phone IP Address.

  • Press OK button.

The IP address will be displayed on the top of display.

Reset to factory settings

This step is not required for brand new out-of-the-box phones, however, if the phone has been already used then it is a must.

  • Open a new browser window and enter your phone IP address in order to access the phone web administration interface login screen. Example: http://192.168.1.22.
  • Login to phone web administration interface with your username and password. Please note, factory default login details are username: admin and password: admin.
  • Click on Upgrade tab.
  • Click on Reset button in order to reset the phone to factory settings. Phone will be reset to the factory settings and reboot.
  • Wait sometime prior for device to reboot.

NOTE: Do not unplug or remove power to the phone while it is updating firmware and configurations.


Registering phone

This chapter describes how to identify Yealink phone model, requirements that must be met and how to register the phone using manual configuration or auto provisioning.

The following topics are covered:

  • Manual configuration
  • Auto provisioning

Manual configuration

This chapter describes how to set UAD settings, create PBXware extension and register the phone.

The following topics are covered:

  • UAD settings
  • Creating extension
  • Registering phone

UAD Settings

UAD settings

Login to PBXware web administration interface

  • Open a new browser window and enter the IP address in order to access the PBXware web administration login screen. Example: http://192.168.1.10.
  • Login to PBXware with your e-mail address and password.

UAD settings

  • Navigate to Settings:UAD.
  • Make sure Yealink UAD is enabled. To check the UAD status click on the edit icon corresponding to your Yealink phone.
  • Make sure Status is set to Active, Auto provisioning is set to No, and DHCP is set to Yes.
  • Click on the Save button to save changes.

Creating extension

Creating Extension

Add Extension

  • Navigate to Extensions. Click on Add Extension.
  • The standard options window will be shown below.
  • Select Yealink phone model from the UAD select box.
  • Select Location: Local or Remote.
Local is for all extensions registered on the LAN and Remote is for all extensions registered from remote networks, WAN, Internet etc.
  • Click on the Next step button.

Extension values

Enter values into the required field text boxes.

REQUIRED FIELDS:

  • Name
Enter a name for the extension being created. Example: John Smith.
  • E-mail
Enter the e-mail address associated with this extension. This e-mail address will receive all system notification messages. Example: john.smith@bicomsystems.com
  • Department
Department to which extension will belong to. Example: Sales.
  • Click on the Save button.

Registering Phone

This chapter describes how to register Yealink phone using Hostname or IP Address, or DNS SRV.

The following topics are covered:

  • Hostname or IP Address
  • DNS SRV

Hostname or IP Address

Login to phone web administration interface

  • Open a new browser window and enter your phone IP address in order to access the phone web administration interface login screen. Example: http://192.168.1.22
  • Login to phone web administration interface with your username and password. Please note, factory default login details are username: admin and password: admin.
  • Click on Account.
  • Enter or set the following details into the respective fields.
REQUIRED FIELDS:
  • Account Active
Make sure the On radio box is selected.
  • Register Name
PBXware extension number. Example: 1003
  • User Name
Usually the same number as the Phone Number.
  • Password
The Secret of the extension as received in the e-mail associated with this extension. Example: _%Z4M3*Ts9y7. A password is generated automatically for each newly created extension.
  • Sip Server
Enter the Hostname or IP Address of the PBXware.
- Example for Hostname: voip.bicomsystems.com
- Example for IP Address: 192.168.1.10
  • Click on the Confirm button.
  • You'll have to wait sometime prior for the device to reboot. If everything is done as above described, you should have successfully registered your phone to PBXware. Dial *123 to verify registration.

DNS SRV

This chapter describes how to use a DNS SRV record which specifies the location of the PBXware. NOTE: Your DNS Server needs to be configured correctly for this to work. Bicom Systems can provide service to set up this for you.

Login to phone web administration interface

  • Open a new browser window and enter your phone IP address in order to access the phone web administration interface login screen. Example: http://192.168.1.22
  • Login to phone web administration interface with your username and password. Please note, factory default login details are username: admin and password: admin.
  • Click on Account.
  • Enter or set the following details into the respective fields.
REQUIRED FIELDS:
  • Account Active
Make sure the On radio box is selected.
  • Register Name
PBXware extension number. Example: 1003
  • User Name
Usually the same number as the Phone Number.
  • Password
The Secret of the extension as received in the e-mail associated with this extension. Example: _%Z4M3*Ts9y7. A password is generated automatically for each newly created extension.
  • Sip Server
In the Sip Server field enter the Hostname.
- Example for the Hostname: bicomsystems.com
  • Make sure you replace Hostname from this example with your PBXware Hostname.
  • Make sure DNS server is configured to automatically route registration request to a PBXware which is actually under another domain name, example: newbicomsystems.com.
  • Transport
Select DNS SRV from the drop down menu.
  • Click on the Confirm button.
  • You'll have to wait sometime prior for the device to reboot. If everything is done as above described, you should have successfully registered your phone to PBXware. Dial *123 to verify registration.

Auto Provisioning

This chapter describes how to set UAD settings, create PBXware extension and register the phone using DHCP or Static IP address.

The following topics are covered:

  • UAD Settings
  • Creating Extension
  • Registering Phone

UAD Settings

UAD settings

Login to PBXware web administration interface.

  • Open a new browser window and enter the IP address in order to access the PBXware web administration login screen. Example: http://192.168.1.10.
  • Login to PBXware with your e-mail address and password.

UAD settings.

  • Navigate to Settings:UAD.
  • Make sure Yealink UAD is enabled. To check the UAD status click on the edit icon corresponding to your Yealink phone.
  • Make sure Status is set to Active, Auto provisioning is set to Yes, and DHCP is set to Yes.
  • Click on the Save button to save changes.

Creating Extension

Creating Extension

Add Extension

  • Navigate to Extensions. Click on Add Extension.
  • The standard options window will be shown below.
  • Select Yealink phone model from the UAD select box.
  • Select Location: Local or Remote.
Local is for all extensions registered on the LAN and Remote is for all extensions registered from remote networks, WAN, Internet etc.
  • Click on the Next step button.

Extension values

Enter values into the required field text boxes.
REQUIRED FIELDS:
  • Name
Enter a name for the extension being created. Example: John Smith.
  • E-mail
Enter the e-mail address associated with this extension. This e-mail address will receive all system notification messages. Example: john.smith@bicomsystems.com
  • Auto Provisioning
Set to Yes.
  • MAC Address
Enter Yealink phone MAC address. Example: 001565FF1536. MAC address can be found at the back of the phone.
  • Click on the Save button.

Registering Phone

This chapter describes how to register Yealink phone using DHCP, TFTP, HTTP & HTTPS or DNS SRV.

The following topics are covered:

  • DHCP
  • TFTP or HTTP & HTTPS
  • DNS SRV

DHCP

Configure DHCP

  • Make sure your DHCP router is configured to use option 66 to automatically instruct phones with the URL for auto provisioning. For more information refer to your router documentation or contact your network administrator.

Phone first boot or user initiated reboot

  • Auto provisioning process will start during phone first boot or after reboot process has been initiated by user. DHCP server will instruct the phone where from to pickup appropriate configuration file. If everything is done as above described, you should have successfully registered your phone to PBXware. Dial *123 to verify registration.

TFTP or HTTP & HTTPS

  • Enter username and password and press Confirm button. NOTE: Factory default login details are username: admin and password: admin.
  • Click on Settings tab.
  • Click on Auto Provision link in the left hand navigation menu.
  • Choose what server type you intend to use: HTTP, HTTPS and Trivial FTP. NOTE: Our recommendation is to use the HTTP.
If you choose to use server type HTTP or HTTPS enter http:// or https:// followed by Hostname or IP Address, followed then by /prov.
Example for Hostname using HTTP: http://abc.bicomsystems.com/prov
Example for Hostname using HTTPS: https://abc.bicomsystems.com/prov
Example for IP Address using HTTP: http://192.168.1.10/prov
Example for IP Address USING HTTPS: https://192.168.1.10/prov
  • Enter Auto Provisioning username and password into User Name and Password fields.
If you choose to use server type TFTP enter tftp:// followed by Hostname or IP Address
Example for Hostname: https://voip.bicomsystems.com
Example for IP Address: tftp://192.168.1.10
  • Click on Autoprovision Now button.
  • A pop up window will show up, click on OK button to confirm your action.
  • You'll have to wait couple of seconds for the configuration to be updated. NOTE: Do not power off your phone.
  • Auto provisioning process will start during phone reboot process, phone will pickup appropriate configuration file from PBXware. If everything is done as above described, you should have successfully registered your phone to PBXware. Dial *123 to verify registration.

Using TLS

NOTE: If you choose to use HTTPS as a protocol for registering your phone:

  • Enter username and password and press Confirm button. NOTE: Factory default login details are username: admin and password: admin.
  • Click on Security tab and go to Trusted certificates and disable the option Only Accept Trusted Certificates.

DNS SRV

DNS SRV

This chapter describes how to use a DNS SRV record which specifies the location of the PBXware. NOTE: Your DNS Server needs to be configured correctly for this to work. Bicom Systems can provide service to set up this for you.

Check if the DNS SRV is enabled in your PBXware

  • Contact your PBXware administrator to find out if the DNS SRV is enabled in your PBXware, or if you have access to the PBXware you can check this yourself.
  • Open a new browser window and enter the IP address in order to access the PBXware web administration login screen. Example: http://192.168.1.10.
  • Login to PBXware with your e-mail address and password.
  • Navigate to Settings ---> Servers. Click on the server corresponding edit button. NOTE: On MT, navigate to Settings ---> Tenants ---> Master Tenant.
  • In Auto Provisioning group, make sure Use DNS SRV when possible: is set to Yes. If it is set to No or N/A, set to Yes and click on the Save button. NOTE: You must re-save all your extensions configured for Auto Provisioning.

Login to phone web administration interface

If there is no DHCP in your network, you can still auto provision your Yealink phone. Please refer to your Yealink phone model User Guide for instruction about setting static IP address. After you configure your Yealink phone to use a static IP address, continue with the following steps.

  • Open a new browser window and enter your phone IP address in order to access the phone web administration interface login screen. Example: http://192.168.1.22
  • Login to phone web administration interface with your username and password. Please note, factory default login details are username: admin and password: admin.
  • Click on Upgrade tab.
  • Click Advanced tab.
  • URL
In the URL field enter the Hostname.
- Example for the Hostname: bicomsystems.com
  • Make sure you replace Hostname from this example with your PBXware Hostname.
  • Make sure DNS server is configured to automatically route registration request to a PBXware which is actually under another domain name, example: newbicomsystems.com.
  • Check New Config
Select Power on + Repeatedly.
  • Click on the Confirm button.
You'll have to wait sometime prior for the device to save changes.
  • Click on the Auto Provision button to run auto provisioning process, then you'll be asked to confirm action. To continue click on OK button.
  • Auto provisioning process will start during phone reboot process, phone will pickup appropriate configuration file from PBXware. If everything is done as above described, you should have successfully registered your phone to PBXware. Dial *123 to verify registration.


Configure BLF

This chapter describes how to configure BLF (Busy Lamp Field) for Yealink T46S.

The following topics are covered:

- Extension Settings

- Phone Settings

Etension Settings

Login to PBXware web administration interface.

  • Open a new browser window and enter the IP address in order to access the PBXware web administration login page. Example: http://192.168.1.10.
  • Login to PBXware with your e-mail address and password.

Edit extension.

  • On the Extensions page click on the edit icon corresponding to your extension.
  • Click on Advanced Options button.
  • Navigate down to the Auto Provisioning and Presence group of settings.
  • Make sure Auto Provisioning is set to Yes.
  • Make sure Presence is set to "Yes".
  • Click on the Save button to save changes.
  • Click on Enhanced services.
  • Click on Directory / BLF List check box and click on Save button in order to enable this feature.
  • Click on Directory / BLF List Edit button.
  • Enter user extension number and click on the BLF check box.
  • Click on Save button.

Phone Settings

Login to phone web administration interface.

  • Open a new browser window and enter your phone IP address in order to access the phone web administration interface login screen. Example: http://192.168.1.22.
  • Login to phone web administration interface with your username and password. Please note, factory default login details are username: admin and password: admin.
  • Click on Phone.
  • Click on DSS Keys.
  • Configure 1 to 27 DSS Keys from the list.
Type: Select BLF.
Value: Enter user extension. Example: 1005
  • Click on Confirm button to save changes.


Additional Configuration Template

If You want to include some additional UAD configuration for Yealink T46S, just add fields to User Agent General Auto Provisioning Template in Settings -> UAD -> Yealink T46S menu, or add them directly to the extension in UAD Auto Provisioning Template section.