Difference between revisions of "Business 6 Dynamic Auto Provisioning"

Revision as of 09:39, 19 January 2022

1 General information
2 Yealink Information
3 Polycom Information
4 Cisco/Linksys Information
- 4.1 Supported features
5 Grandstream Information
6 Obihai Information
7 VTech Information
8 HTek Information
9 Denwa Information
10 Mitel Information
11 Gigaset Information
12 Snom Information
13 Huawei Information
14 Fanvil Information
15 Panasonic Information
16 Alcatel Information
17 Aastra Information
18 ReadyNet devices
19 Sangoma Information

General information

In version v3.8.2 we introduced dynamic TFTP/HTTP provisioning.

Instead of writing configuration files to disk, files are now dynamically created by PBXware HTTP application and served to device when it sends a request to the server.

NOTE:

By default (with no username and password set) HTTP provisioning is disabled.

Setting HTTP Username and HTTP Password will automatically enable HTTP provisioning as well. Devices that do not support Digest HTTP authentication (username and password) cannot be auto-provisioned via HTTP, only via TFTP.

HTTP Username and HTTP Password are set under:

Settings -> Servers -> YourServerName (edit) -> Auto Provisioning (section) -> HTTP Username/HTTP Password

HTTP server

HTTP application is running under following location:

http://ip-address/prov

MAC configuration requests

Some examples of requests:

http://ip-address/prov/mac.cfg

http://ip-address/prov/cfg.mac

http://ip-address/prov/phonemac.cfg

Check Filename in each device section.

Filesystem files (firmwares etc)

http://ip-address/prov/sip.ld

Custom config files

http://ip-address/prov/aastra.cfg

MAC configuration files

To get configuration, devices ask for files that contain its MAC address. This configuration requires username and password.

Testing with curl

In order to perform testing of auto provisioning and to verify validity of content, one needs to use curl or web browser.

More information about curl you can find here:

http://curl.haxx.se

Here is an example of command:

 curl -i -u user:pass --digest http://ip-address/prov/mac.cfg

Parameters:

-i

Include HTTP protocol in output

-u

Specify username:password for authentication

--digest

We support only digest HTTP authentication, therefore this is a mandatory parameter. If you do not specify it, curl will use Basic HTTP Authentication and it won't work.

--user-agent

This is how you can send a different User-Agent string, if you want to test HTML/XML Directory pages.

For instance:

--user-agent "Yealink SIP-T38"

Testing in browser is advisable, if you want to test validity of large XML output. Devices that require XML configuration will be served with text/xml Content-Type and this will be understood by browsers. You will then know if XML document is valid or not.

Testing with wget

In case curl is not installed (this will most often be the case on VPSes), users can use wget to perform testing.

Example command:

 wget -S -q http://username:password@ip-address/prov/mac.cfg -O-

Parameters:

-q

Turns off verbosity and progress bar from wget.

-S

Output should include HTTP headers.

--user

HTTP username, if not specified as part of the URL.

--password

HTTP password, if not specified as part of the URL.

-O-

Output to stdout instead of file.

-U=user-agent

Use it to set User-Agent.

For more options consult:

wget --help

in your PBXware shell.

Test HTTPS mode

HTTPS also works and will work on devices that support HTTPS. Some devices do not support self-signed certificate, therefore you will need to buy signed certificate.

curl command:

curl -i -u user:pass --digest --insecure https://ip-address/prov/mac.cfg

Additional options:

--insecure

This options accepts self-signed certificate as valid certificate.

HTTP response codes

Here is the list of HTTP response codes from HTTP service and its meaning:

 401 Authentication Required

This header will appear when username and password is not supplied. This lets device know it has to send username and password in next request.

 200 OK

should follow after this request, in all other cases provisioning failed.

 403 Forbidden

This error will appear if you do not specify valid authentication information. It will also appear if tenant/server do not have HTTP username and password set.

 404 Not Found

This error has multiple meanings but some are:

- MAC address doesn't exist

- Device doesn't exist or can't be used for auto provisioning

- Device cannot handle HTML/XML Directory

- Custom route doesn't exist

- File path is wrong

- File doesn't exist

- Request can't be handled

 500 Internal Server Error

Something went horribly wrong. Usually some problematic SQL error. Please consult Bicom Systems support.

 200 OK

This happens if all is good and content is delivered to device.

HTTP logs

You can watch all devices and requests with this command (for HTTP traffic)

 cd /opt/pbxware
 tail -f pw/var/log/nginx/localhost.access_log

for HTTPS:

 cd /opt/pbxware
 tail -f pw/var/log/nginx/localhost.ssl_access_log

Output example:

 10.1.0.138 - - [23/Apr/2013:11:43:27 +0200] "GET /prov/_directory/001565267db9 HTTP/1.0" 200 2654 "-" "Yealink SIP-T38G 38.0.23.22 00:15:65:26:7d:b9" "-"

Important bits are:

GET filename

This is what devices asked for.

200 2654

200 OK was sent, Content-Legth was 2654.

Please note, if authentication is needed, correct sequence is 401, then 200 OK.

Yealink SIP-T38G 38.0.23.22

Device User-Agent.

Syslog

Some devices can send logs via syslog.

In order to setup syslog-ng on Gentoo as syslog host, do this:

 Edit /etc/syslog-ng/syslog-ng.conf

 nano /etc/syslog-ng/syslog-ng.conf

and add these lines on bottom:

 source net { udp(); };
 destination remote { file("/var/log/remote/$FULLHOST"); };
 log { source(net); destination(remote); };

Create directory /var/log/remote/

 mkdir /var/log/remote

Restart syslog-ng with:

 /etc/init.d/syslog-ng restart

Yealink Information

Provisioning method

Either HTTP or TFTP.

HTTPS works with any certificate if "Only Accept Trusted Certificates" is Disabled.

Yealink devices

Filename

MAC.cfg

File Format

Format is different for T2xP and T3xP devices unless v.70 firmware is used.

Supported features

Model	Firmware	Basic	Time/Date	HTTP Directory	LDAP Directory	Directory/BLF	UAD General Template	UAD Template (extension)	Preffered Codec	DHCP Settings	HTTP Provisioning	HTTPS Provisioning	Hot Desking
T18	18.0.23.5	✔	✘	✘	✘	✘	✘	✘	✘	✘	✔	✘	✔
T19P	53.84.0.15				✘								✔
T20	9.61.23.9	✔	★	✘	✘	✔	✔	✔	✘	✘	✔	✔	✔
T21PE2	52.84.0.15	✔	✔	✔	✘	✔	✔	✔	✘	✔	✔	✔	✔
T22	7.73.0.50	✔	★	✔	✘	N/A	✔	✔	✘	✘	✔	✔	✔
T23G	44.84.0.15	✔	★	✔	✔	✔	✔	✔	✘	✘	✔	✔	✔
T26	6.73.0.50	✔	★	✔	✘	✔	✔	✔	✘	✘	✔	★	✔
T27P	45.83.0.50	✔	★	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T27G	69.84.0.15	✔	★	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T28	2.73.0.50	✔	★	✔	✘	✔	✔	✔	✘	✘	✔	✔	✔
T29G	46.83.0.50	✔	★	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T30	124.85.0.40	✔	✔	✔	✔	✘	✔	✔	✘	✔	✔	✔	✔
T30P	124.85.0.40	✔	✘	✔	✔	✘	✔	✔	✘	✔	✔	✔	✔
T31	124.85.257.55	✔	✔	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T31P	124.85.257.55	✔	✔	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T31G	124.85.257.55	✔	✔	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T32	32.70.1.33	✔	★	✔	✘	✔	✔	✔	✘	✘	✔	✔	✔
T33P	124.85.257.55	✔	✔	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T33G	124.85.257.55	✔	✔	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T38	38.70.0.185	✔	★	✔	✘	✔	✔	✔	✘	✘	✔	✔	✔
T40G	76.84.0.15	✔	★	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T41P	36.83.0.50	✔	★	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T41S	66.84.0.15	✔	★	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T42G	29.83.0.50	✔	★	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T42S	66.84.0.15	✔	★	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T41U	108.84.0.30	✔	✔	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T42U	108.84.0.30	✔	✔	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T43U	108.84.0.30	✔	✔	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T46U	108.84.0.30	✔	✔	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T48U	108.84.0.30	✔	✔	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T46G	28.83.0.50	✔	★	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T46S	66.84.0.15	✔	★	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T48G	35.83.0.50	✔	★	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T48S	66.84.0.15	✔	★	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T49G	51.80.0.100	✔	★	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T52S	70.84.0.15	✔	★	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T53	95.84.0.30	✔	★	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T53W	95.84.0.30	✔	★	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T54S	70.84.0.15	✔	★	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T54W	96.84.0.30	✔	★	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T56A	58.83.0.15	✔	★	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T57W	97.84.0.30	✔	★	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
T58V	58.80.0.10	✔	★	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
VP59	91.283.0.30	✔	★	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
CP860	37.81.0.10	✔	★	✔	✔	N/A	✔	✔	✘	✔	✔	✔	✔
CP920	78.81.0.15	✔	★	✔	✔	N/A	✔	✔	✘	✔	✔	✔	✔
CP960	73.15.0.38	✔	★	✔	✔	✔	✔	✔	✘	✔	✔	✔	✔
W52P	25.81.0.30	✔	★	✔	✔	N/A	✔	✔	✘	✔	✔	✔	✔
W56P	25.81.0.30	✔	★	✔	✔	N/A	✔	✔	✘	✔	✔	✔	✔
W60B	77.83.0.25	✔	★	✔	✔	N/A	✔	✔	✘	✔	✔	✔	✔
W70B	146.85.0.20	✔	★	✔	✔	N/A	✔	✔	✘	✔	✔	✔	✔
W80B	103.83.0.30	✔	★	✔	✔	N/A	✔	✔	✘	✔	✔	✔	✔
W90DM	130.85.0.10	✔	✔	✔	✔	✘	✔	✔	✘	✔	✔	✔	✔
T60P					✘
T65P					✘

Notes:

DST is not supported
Yealink T18 has auto provisioning bug. If provisioning server is assigned through Option 66, manually assigned provisioning server will not work unless phone is set to work with static IP address.

Firmware v70

Due to Yealink omission, we are not able to detect phone firmware version, when using TFTP. If you would like to auto provision Yealink phone with v70 firmware, please create file v70.txt in tftp directory, like this:

cd /opt/pbxware/pw/tftp touch v70.txt

If file v70.txt exists in /opt/pbxware/pw/tftp folder, all auto provisioning data for Yealink phones will be in v70 format, hence all phones should be on v70 or pre-v70 version. Mixing is not supported.

Known issues

Make sure you do factory reset after upgrade to latest V70 firmware. This is known to fix at least one problem - wrong User-Agent string for T46G device.

Wrong User-Agent:

Yealink-T46G 28.71.0.85 28.1.0.128.0.0.0

Correct User-Agent:

Yealink SIP-T46G 28.71.0.85 00:15:65:45:70:71

Problem with firmware older than 28.71.0.85 and T46G

Yealink T46G does not send User-Agent when requesting remote directory file, which is required due to security reasons, hence remote directory will not work. This issue has been fixed in 28.71.0.85 firmware.

Polycom Information

Provisioning method

Both TFTP and HTTP are supported.

HTTPS should work but requires valid certificate signed by pre-installed Certificate Authority. It cannot be a wildcard certificate.

Polycom devices

Filenames

MAC.cfg

Asks for where config files are, where SIP firmware is.

phoneMAC.cfg

Main configuration file.

MAC-directory.cfg

BLF/Directory list.

Content Type

XML format

Supported features

Model	Firmware	Basic	Time/Date	HTTP Directory	LDAP Directory	Directory/BLF	UAD General Template	UAD Template (extension)	Preffered Codec	DHCP Settings	HTTP Provisioning	HTTPS Provisioning	Hot Desking
IP301	3.1.8	✔	✔	✘	✘	✔	✔	✘	✘	✘	✔	★
IP320					✘
IP321	4.0.3	✔	✔	✔	✘	✔	✔	✘	✘	✘	✔	★
IP330					✘
IP331	4.0.3	✔	✔	✔	✘	✔	✔	✘	✘	✘	✔	★
IP335	4.0.3	✔	✔	✔	✘	✔	✔	✘	✘	✘	✔	★
IP450	4.0.3	✔	✔	✔	✘	✔	✔	✘	✘	✘	✔	★
IP501					✘
IP550	4.0.3	✔	✔	✔	✘	✔	✔	✘	✘	✘	✔	★
IP560					✘
IP601	3.1.8	✔	✔	✔	✘	✔	✔	✘	✘	✘	✔	★
IP650	4.0.3	✔	✔	✔	✘	✔	✔	✘	✘	✘	✔	★
IP670					✘
IP5000					✘
Poly Trio 8300	7.0.0.4265	✔	✔	✔	✔	✘	✔	✔	✔	✔	✔	✔	✔
Poly Trio C60	7.2.0.12361	✔	✔	✘	✔	✘	✔	✔	✔	✔	✔	✔	✔
VVX101	5.9.2	✔	★	✔	✔	✘	✔	✔	✔	✔	✔	★	✔
VVX201	5.9.2	✔	★	✔	✔	✘	✔	✔	✔	✔	✔	★	✔
VVX300	5.9.2	✔	★	✔	✔	✔	✔	✔	✔	✔	✔	★	✔
VVX310	5.7.1	✔	★	✔	✔	✔	✔	✔	✔	✔	✔	★	✔
VVX400	5.9.2	✔	★	✔	✔	✔	✔	✔	✔	✔	✔	★	✔
VVX410	5.7.1	✔	★	✔	✔	✔	✔	✔	✔	✔	✔	★	✔
VVX500	5.9.2	✔	★	✔	✔	✔	✔	✔	✔	✔	✔	★	✔
VVX600	5.9.2	✔	★	✔	✔	✔	✔	✔	✔	✔	✔	★	✔
VVX1500	5.7.1				✘								✔
VVX150	6.1.0	✔	★	✔	✔	✔	✔	✔	✔	✔	✔	★	✔
VVX250	6.1.0	✔	★	✔	✔	✔	✔	✔	✔	✔	✔	★	✔
VVX350	6.1.0	✔	★	✔	✔	✔	✔	✔	✔	✔	✔	★	✔
VVX450	6.1.0	✔	★	✔	✔	✔	✔	✔	✔	✔	✔	★	✔
VVX411	6.1.0	✔	★	✔	✔	✔	✔	✔	✔	✔	✔	★	✔
VVX501	6.1.0	✔	★	✔	✔	✔	✔	✔	✔	✔	✔	★	✔
VVX601	6.1.0	✔	★	✔	✔	✔	✔	✔	✔	✔	✔	★	✔
OBi2182	6.2.2	✔	★	✔	✘	✔	✔	✔	✔	✔	✔	★	✔
VVX150 OBi Edition	6.3.0.0	✔	★	✔	✘	✔	✔	✔	✔	✔	✔	★	✔
VVX250 OBi Edition	6.3.0.0	✔	★	✔	✘	✔	✔	✔	✔	✔	✔	★	✔
VVX350 OBi Edition	6.4.0.2	✔	★	✔	✘	✔	✔	✔	✔	✔	✔	★	✔
VVX450 OBi Edition	6.4.0.2	✔	★	✔	✘	✔	✔	✔	✔	✔	✔	★	✔

General UAD config

NOTE: General UAD config must be valid XML for that particular firmware otherwise all configuration will fail.

PUT requests Polycom phones will send PUT requests to server and these files can be saved on disk if upload mode is turned on.

What Polycom phones like to send:

Log files
Configuration override files
Configuration saved in web interface, set on phone.
Directory

This is not supported, as it conflicts with Enhanced Services Directory. It is not safe to turn this feature on public internet. To turn it on, create upload directory:

 cd /opt/pbxware/pw/tftp
 mkdir upload
 chown 101:1003 upload

It is not required to have WebDAV enabled in nginx for above to work.

For information on how to prepare your PBXware for Polycom multiple firmware support please check our HowTo create Polycom Firmware Pack

NOTE: If you are not sure how to create Polycom firmware package please contact our support and we will be glad to help you.

Cisco/Linksys Information

Filename:

SIPmac.cnf
spa.cfg
mac.cfg
SEPmac.cnf.xml

Supported features

Model	Firmware	Basic	Time/Date	HTTP Directory	LDAP Directory	Directory/BLF	UAD General Template	UAD Template (extension)	Preffered Codec	DHCP Settings	HTTP Provisioning	HTTPS Provisioning	Hot Desking
8841	11-3-3	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔
8851	11-3-3	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔
8865	11.2.3	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘	✔
7821	11.0.1	✔	✔	✔	✔	N/A	✔	✔	✔	✔	✔	✘	✔
6851	11.0.1	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘	✔
7940	8.12	✔	✘	✔	✘	✘	✘	✔	✘	✘	✘	✘	✔
7941	8.5.4	✔	✘	✔	✘	✘	★	✘	✘	✘	✘	✘	✔
7942					✘
7945					✘
7960	8.12	✔	✘	✔	✘	✘	✘	✔	✘	✘	✘	✘	✔
7961	8.5.4	✔	✘	✔	✘	✘	★	✘	✘	✘	✘	✘	✔
7962					✘
7965					✘
7971					✘
7975					✘
SPA301G	7.5.4	✔	✘	✘	✘	✘	✔	✘	✔	✔	✔	✘	✔
SPA501G	7.4.8a	✔	✘	✘	✘	✔	✔	✘	✔	✔	✔	✘	✔
SPA502G	7.4.8a	✔	✔	✔	✘	✔	✔	✔	✔	✔	✔	✘	✔
SPA504G					✘
SPA508G	7.4.8a	✔	✔	✔	✘	✔	✔	✘	✔	✔	✔	✘	✔
SPA509G	7.5.1a	✔	✔	✔	✘	✔	✔	✔	✔	✔	✔	✘	✔
SPA514G	7.5.2	✔	✔	✔	✘	✔	✔	✔	✔	✔	✔	✘	✔
SPA525G2	7.4.7	✔	✔	✔	✘	✔	✔	✘	✔	✔	✔	✘	✔
SPA901					✘
SPA941	5.1.8	✔	✔	✘	✘	✔	✔	✘	✔	✔	✔	✘
SPA942					✘
SPA962	6.1.5	✔	✔	✘	✘	✔	✔	✘	✔	✔	✘	✘
SPA112	1.4.1	✔	N/A	N/A	✘	N/A	✔	✘	✔	✔	✔	✘
PAP2	5.1.6	✔	N/A	N/A	✘	N/A	✔	✘	✔	✔	✘	✘
SPA8000					✘

Cisco 79X1 have very complicated XML output.

It is possible to provide default XML template for each device by creating template in:

/tftp/SEP_Default.xml /tftp/SEP_Device_7941.xml Template is attached in the document.

Documentation: http://www.voip-info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP

Firmware: http://software.cisco.com/download/navigator.html?mdfid=269065653&flowid=5255 (requires Cisco login)

Asterisk NAT

Make sure nat=no is set in sip.conf, otherwise nothing will work.

WARNING: Cisco 79xx devices, other than 7940 and 7960, will not be able to work if PBXware is not in the same LAN.

These devices send UDP SIP requests from a high source port but expect a reply on port 5060. Because of this behavior and the way NAT works, phones will always receive response on the port their UDP SIP request was sent from and will not be able to register. Even if devices are in the same LAN, customers will have to manually set option NAT to No on PBXware, in Extensions -> Edit EXT -> Network Related section, in order for Cisco 79xx devices to successfully register.

Grandstream Information

Provisioning method

HTTPS, HTTP & TFTP.

Some Grandstream devices support HTTP, but Basic authentication only.

Grandstream devices

Filename

cfgMAC

File Format Format is binary and is not really human-readable. It consists of PXX=value fields.

You can pipe output to following command:

curl ... | hexdump -C -v

Supported features

Model	Firmware	Basic	Time/Date	HTTP Directory	Directory/BLF	UAD General Template	UAD Template (extension)	Preffered Codec	DHCP Settings	HTTP Provisioning	HTTPS Provisioning	Hot Desking
GXP2000	1.2.5.3	✔	✔	✘	✘	✘	✔	✔	✔	✘	✘	✘
GXP2124
GXP2160		✔	✔	✘	✘	✔	✔	✔	✔	✔	✘	✘
DP750	1.0.3.23	✔	✘	N/A	N/A	✔	✔	✔	✔	✔	✔	✘
DP752	1.0.13.0	✔	✔	N/A	N/A	✔	✔	✔	✔	✔	✔	✘
GXP1615	1.0.4.152	✔	✔	✔	N/A	✔	✔	✔	✔	✔	✔	✘
GXP1625	1.0.4.82	✔	✔	✔	N/A	✔	✔	✔	✔	✔	✔	✔
GXP1628	1.0.4.82	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔
GXP1630	1.0.4.67	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔
GXP1760w	1.0.1.98	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘
GXP1782	1.0.1.8	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔
GXP2130	1.0.9.69	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘
GXP2135	1.0.9.108	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘
GXP2140	1.0.11.3	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘
GXP2170	1.0.8.53	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔
GRP2612	1.0.1.7	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔
GRP2613	1.0.1.23	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔
GRP2614	1.0.1.23	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔
GRP2615	1.0.1.23	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔
GRP2616	1.0.1.23	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔
GXV3240	1.0.3.277	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘	✘
GXV3275	1.0.3.177	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘
GXV3350	1.0.3.13	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘
GXV3370	1.0.3.8	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘
GXV3380	1.0.1.19	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘
HT286	1.1.0.45	✔	✘	✘	✘	✘	✔	✔	✔	✘	✘	✘
HT386	1.0.3.96	✔	✘	✘	✘	✘	✔	✔	✔	✘	✘	✘
HT486	1.1.0.45	✔	✘	✘	✘	✘	✔	✔	✔	✘	✘	✘
HT488	1.0.3.96	✔	✘	✘	✘	✘	✔	✔	✔	✘	✘	✘
HT496	1.0.3.96	✔	✘	✘	✘	✘	✔	✔	✔	✘	✘	✘
HT502	1.0.9.1	✔	✘	✘	✘	✘	✔	✔	✔	✘	✘	✘
HT503	1.0.9.1	✔	✘	✘	✘	✘	✔	✔	✔	✘	✘	✘
HT701	1.0.4.8	✔	✘	✘	✘	✘	✔	✔	✔	✘	✘	✘
HT702
HT704
HT802	1.0.17.5	✔	N/A	N/A	N/A	✔	✔	✔	✔	✔	✔	✘
HT814	1.0.3.2	✔	N/A	N/A	N/A	✔	✔	✔	✔	✔	✔	✘
HT818	1.0.17.5	✔	N/A	N/A	N/A	✔	✔	✔	✔	✔	✔	✘

Obihai Information

Provisioning Method

TFTP & HTTP

Obihai devices

Filenames:

Main configuration file:

mac.xml

BLF/Directory list:

mac.xml

Supported features

Model	Firmware	Basic	Time/Date	HTTP Directory	Directory/BLF	UAD General Template	UAD Template (extension)	Preffered Codec	DHCP Settings	HTTP Provisioning	HTTPS Provisioning	Hot Desking
OBi1022	5.0.0	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘	✘
OBi1032	5.0.0	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘	✘
OBi1062	5.0.0	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘	✘
110
202
300	3.1.1	✔	N/A	N/A	N/A	✔	✔	✔	N/A	N/A	✔	✘
302	3.1.1	✔	N/A	N/A	N/A	✔	✔	✔	N/A	✔	✔	✘
504	4.0.1	✔	N/A	N/A	N/A	✔	✔	✔	N/A	✔	✔	✘
508	4.0.1	✔	N/A	N/A	N/A	✔	✔	✔	N/A	✔	✔	✘

VTech Information

Provisioning Method

TFTP

VTech devices

Filenames:

Main configuration file

xxx_mac.cfg (xxx = phone model)

BLF/Directory list

mac.xml

File Format:

Supported features

Model	Firmware	Basic	Time/Date	HTTP Directory	Directory/BLF	UAD General Template	UAD Template (extension)	Preffered Codec	DHCP Settings	HTTP Provisioning	HTTPS Provisioning	Hot Desking
ET605	8.10.2.62	✔	✔	N/A	N/A	✔	✔	✘	✔	✔	✘	✘
ET617	8.10.1.34	✔	✔	N/A	✔	✔	✔	✘	✔	✔	✘	✘
ET635	8.10.1.35	✔	✔	N/A	✔	✔	✔	✘	✔	✔	✘	✘
ET685	8.10.2.62	✔	✔	N/A	✔	✔	✔	✘	✔	✔	✘	✘
VDP650	1.0.0.7	✔	✔	N/A	N/A	✔	✔	✘	✔	✔	✘	✘
VSP600	1.1.4.1	✔	✔	N/A	N/A	✔	✔	✔	✔	✘	✘	✘
VSP715	1.1.4.0	✔	✔	N/A	N/A	✔	✔	✔	✔	✘	✘	✘
VSP716A	2.0.5.1	✔	✔	✔	N/A	✔	✔	✔	✔	✔	✘	✘
VSP725	1.1.4.0	✔	✔	✔	✔	✔	✔	✔	✔	✘	✘	✘
VSP726	2.0.3.2	✔	✔	✔	✔	✔	✔	✔	✔	✘	✘	✘
VSP726A	2.0.5.1	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘	✘
VSP735	1.1.4.0	✔	✔	✔	✔	✔	✔	✔	✔	✘	✘	✘
VSP736	2.0.3.2	✔	✔	✔	✔	✔	✔	✔	✔	✘	✘	✘
VSP736A	2.0.5.1	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘	✘
VCS754	1.1.4.0	✔	✔	N/A	N/A	✔	✔	✔	✔	✘	✘	✘

HTek Information

Provisioning Method

HTTP or TFTP

Htek devices

Filenames:

Main configuration file:

cfgMAC

Supported features

Model	Firmware	Basic	Time/Date	HTTP Directory	Directory/BLF	UAD General Template	UAD Template (extension)	Preffered Codec	DHCP Settings	HTTP Provisioning	HTTPS Provisioning	Hot Desking
UC862		✔	✘	✘	✔	✘	✔	✔	✘	✘	✘	✔
UC802		✔	✘	✘	✔	✘	✔	✔	✘	✘	✘	✔
UC803		✔	✘	✘	✔	✘	✔	✔	✘	✘	✘	✔
UC804		✔	✘	✘	✘	✘	✔	✔	✘	✘	✘	✔
UC806		✔	✘	✘	✘	✘	✔	✔	✘	✘	✘	✔
UC840		✔	✘	✘	✘	✘	✔	✔	✘	✘	✘	✔
UC842		✔	✘	✘	✘	✘	✔	✔	✘	✘	✘	✔
UC860		✔	✘	✘	✘	✘	✔	✔	✘	✘	✘	✔
UC902P	2.0.4.4.25	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘	✔
UC903	2.0.4.4.25	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘	✔
UC912P	2.0.4.4.33	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘	✔
UC912G	2.0.4.4.33	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘	✔
UC923	2.0.4.4.25	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘	✔
UC924	2.0.4.4.25	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘	✔
UC924E	2.0.4.4.33	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘	✔
UC926	2.0.4.4.25	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘	✔
UC926E	2.0.4.4.33	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘	✔

Denwa Information

Provisioning Method

HTTPS, HTTP or TFTP

Denwa devices

Filenames:

Main configuration file:

Supported features

Model	Basic	UAD General Template	UAD Template (extension)	DHCP Settings	HTTP Provisioning	HTTPS Provisioning	Hot Desking
DW-210P	✔	✔	✔	✔	✔	✔	✘
DW-310P	✔	✔	✔	✔	✔	✔	✘
DW-610P	✔	✔	✔	✔	✔	✔	✘

Mitel Information

Provisioning method

TFTP only, HTTP not possible as Mitel devices does not support username and password.

Mitel devices

Filenames:

aastra.cfg
mac-directory.csv

Directory list in CSV format.

Supported features

Model	Firmware	Basic	Time/Date	HTTP Directory	Directory/BLF	UAD General Template	UAD Template (extension)	Preffered Codec	DHCP Settings	HTTP Provisioning	HTTPS Provisioning	Hot Desking
6867i	4.3.0.2036	✔	✔	✘	✔	✔	✔	✘	✔	✘	✘	✘

Gigaset Information

Provisioning method

HTTP only

Gigaset devices

Filenames:

MAC

Supported features

Model	Firmware	Basic	Time/Date	HTTP Directory	Directory/BLF	UAD General Template	UAD Template (extension)	Preffered Codec	DHCP Settings	HTTP Provisioning	HTTPS Provisioning	Hot Desking
N510	42.247	✔	✔	✔	✘	✔	✔	✔	✔	✔	✘	✘
N720	70.110.00.000.00	✔	✔	✘	✘	✔	✔	✔	✔	✔	✘	✘
N870	2.26.0	✔	✔	✘	✘	✔	✔	✔	✔	✔	✘	✘
Maxwell Basic	2.22.7	✔	✔	✘	✘	✔	✔	✔	✔	✔	✘	✔
Maxwell 2	2.22.7	✔	✔	✘	✔	✔	✔	✔	✔	✔	✘	✔
Maxwell 3	2.22.7	✔	✔	✘	✔	✔	✔	✔	✔	✔	✘	✔
Maxwell 4	3.13.13	✔	✔	✘	✔	✔	✔	✔	✔	✔	✘	✔
Maxwell 10	5.1.1-195	✔	✔	✘	✔	✔	✔	✔	✘	✔	✘	✘

Snom Information

Provisioning Method

TFTP only, HTTP not possible as Snom devices doesn't support username and password. Snom devices D120, D717, D735 and D785 support both TFTP and HTTP.

Snom devices

Filenames:

snomXXX-mac.htm (XXX=320, 360..)

File Format:

Plain text

Supported features

Model	Firmware	Basic	Time/Date	HTTP Directory	Directory/BLF	UAD General Template	UAD Template (extension)	Preffered Codec	DHCP Settings	HTTP Provisioning	HTTPS Provisioning	Hot Desking
320	8.7.3.7	✔	✘	✘	✘	✔	✔	✘	✔	✘	✘	✘
360	8.7.3.25	✔	✘	✘	✘	✔	✔	✘	✔	✘	✘	✘
710	8.9.3.80	✔	✔	✘	✔	✔	✔	✘	✔	✘	✘	✘
D120	10.1.33.33	✔	✔	✘	N/A	✔	✔	✘	✔	✔	✔	✘
D315	8.9.3.80	✔	✔	✘	✘	✔	✔	✘	✔	✘	✘	✘
D335	10.1.57.14	✔	✔	✘	✔	✔	✔	✘	✔	✔	✘	✘
D345	8.9.3.80	✔	✔	✘	✔	✔	✔	✘	✔	✘	✘	✘
D375	8.9.3.80	✔	✔	✘	✔	✔	✔	✘	✔	✘	✘	✘
D385	10.1.57.14	✔	✔	✘	✔	✔	✔	✘	✔	✔	✘	✘
D715	8.9.3.80	✔	✔	✘	✔	✔	✔	✘	✔	✘	✘	✘
D717	10.1.33.1	✔	✔	✘	✔	✔	✔	✘	✔	✔	✔	✘
D735	10.1.33.33	✔	✔	✘	✔	✔	✔	✘	✔	✔	✔	✘
D745	8.9.3.80	✔	✔	✘	✔	✔	✔	✘	✔	✘	✘	✘
D765	8.9.3.80	✔	✔	✘	✔	✔	✔	✘	✔	✘	✘	✘
D785	10.1.33.33	✔	✔	✘	✔	✔	✔	✘	✔	✘	✘	✘
PA1	8.7.5.75	✔	✘	✘	✘	✔	✔	✘	✔	✔	✘	✘
M300	IPDECT-V2/05.00/B0001	✔	✘	✘	✘	✔	✔	✘	✔	✔	✘	✘
M900	IPDECT-V2/05.00/B0001	✔	✘	✘	✘	✔	✔	✘	✔	✔	✘	✘

Huawei Information

Provisioning Method

OPTION 246 only

Huawei devices

Filenames:

mac.xml

Supported features

Model	Firmware	Basic	Time/Date	HTTP Directory	Directory/BLF	UAD General Template	UAD Template (extension)	Preffered Codec	DHCP Settings	HTTP Provisioning	HTTPS Provisioning	Hot Desking
eSpace 7910	xxxSPCh00	✔	✔	✔	✔	✔	✔	✘	✘	✘	✘	✘
eSpace 7950	xxxSPCh00	✔	✔	✔	✔	✔	✔	✘	✘	✘	✘	✘

Fanvil Information

Provisioning Method

HTTPS, HTTP & TFTP

Fanvil devices

Filenames:

Main Configuration file:

mac.cfg

BLF/Directory list:

mac.csv

Supported features

Model	Firmware	Basic	Time/Date	HTTP Directory	Directory/BLF	UAD General Template	UAD Template (extension)	Preffered Codec	DHCP Settings	HTTP Provisioning	HTTPS Provisioning	Hot Desking
H3	2.0.2.2822	✔	N/A	N/A	N/A	✔	✔	✔	✔	✔	✔	✘
H5	2.0.2.2818	✔	✘	N/A	N/A	✔	✔	✔	✔	✔	✔	✘
X2P	2.2.0.3753	✔	✘	✔	N/A	✔	✔	✔	✔	✔	✔	✘
X3G	2.2.0.3685	✔	✘	✔	✔	✔	✔	✔	✔	✔	✔	✘
X3SP	2.2.0.3685	✔	✘	✔	✔	✔	✔	✔	✔	✔	✔	✘
X4	2.0.3.3019	✔	✘	✔	✔	✔	✔	✔	✔	✔	✔	✘
X4G	2.2.0.3685	✔	✘	✔	✔	✔	✔	✔	✔	✔	✔	✘
X4U	2.4.3	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘	✘
X5S	0.9.0	✔	✘	✔	✔	✔	✔	✔	✔	✔	✔	✘
X6	0.7.0.1	✔	✘	✔	✔	✔	✔	✔	✔	✔	✔	✘
X7	1.0.15	✔	✘	✔	✔	✔	✔	✔	✔	✔	✔	✘
X7C	1.0.15	✔	✘	✔	✔	✔	✔	✔	✔	✔	✔	✘
X210	1.0.13	✔	✘	✔	✔	✔	✔	✔	✔	✔	✔	✘

Panasonic Information

Provisioning Method

HTTP & TFTP

Panasonic devices

Filenames:

Main Configuration file:

mac.cfg

Supported features

Model	Firmware	Basic	Time/Date	HTTP Directory	Directory/BLF	UAD General Template	UAD Template (extension)	Preffered Codec	DHCP Settings	HTTP Provisioning	HTTPS Provisioning	Hot Desking
KX-UTG300B	3.137	✔	✔	N/A	✔	✔	✔	✔	✔	✔	✘	✘
KX-TGP550	12.9	✔	✔	N/A	N/A	✔	✔	✘	✘	✘	✘	✘
KX-HDV130
KX-HDV230C	HDV230/11.180	✔	✔	N/A	✔	✔	✔	✔	✔	✔	✘	✘
KX-HDV330C	HDV330/11.100	✔	✔	N/A	✔	✔	✔	✔	✔	✔	✘	✘
KX-UT113
KX-UT123
KX-UT133
KX-UT136

Alcatel Information

Provisioning Method

HTTPS, HTTP & TFTP

Alcatel devices

Filenames:

Main Configuration file:

Alcatel_IPxxx-MAC.cfg

Supported features

Model	Firmware	Basic	Time/Date	HTTP Directory	Directory/BLF	UAD General Template	UAD Template (extension)	Preffered Codec	DHCP Settings	HTTP Provisioning	HTTPS Provisioning	Hot Desking
H2P	2.10.00.0001060	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔	✘
IP800	15.70.0.136	✔	✔	✔	✔	✔	✔	✘	✘	✔	✔	✘
IP600	14.70.0.144	✔	✔	✔	✔	✔	✔	✘	✘	✔	✔	✘
IP300	1.0.5b	✔	✔	✔	✔	✔	✔	✘	✘	✔	✔	✘
IP200	13.70.0.144	✔	✔	N/A	✔	✔	✔	✘	✘	✔	✔	✘
IP150	0.64.2a	✔	✔	✔	✔	✔	✔	✘	✘	✔	✔	✘
IP100	0.64.6b	✔	N/A	N/A	N/A	✔	✔	✘	✘	✔	✔	✘
IP2015	1.0.5b	✔	N/A	N/A	N/A	✔	✔	✘	✘	✔	✔	✘
IP1020
M3	2.12.07.010.1828	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔	✔
M7	2.12.04.000.1720	✔	✔	✔	✘	✔	✔	✔	✔	✔	✔	✔

Aastra Information

Provisioning method

TFTP only, HTTP not possible as Aastra devices does not support username and password.

Aastra devices

Filenames:

aastra.cfg
mac.cfg
mac-directory.csv

Directory list in CSV format.

File Format

Plain text

Supported features

Model	Firmware	Basic	Time/Date	HTTP Directory	Directory/BLF	UAD General Template	UAD Template (extension)	Preffered Codec	DHCP Settings	HTTP Provisioning	HTTPS Provisioning	Hot Desking
6757i	3.2.0.70	✔	✘	✘	✔	✔	✔	✘	✔	✘	✘	✘
6755i
6753i
480i
9112i
9133i

ReadyNet devices

Provisioning method

TFTP only, HTTP not possible as ReadyNet devices does not support username and password.

ReadyNet devices

Filenames:

MAC.conf

File Format

Plain text

Supported features

Model	Firmware	Basic	Time/Date	HTTP Directory	Directory/BLF	UAD General Template	UAD Template (extension)	Preffered Codec	DHCP Settings	HTTP Provisioning	HTTPS Provisioning	Hot Desking
AC1200MS	3.20	✔	N/A	N/A	N/A	✔	✔	✘	✘	✘	✘	✘
AC1100MSF	3.20	✔	N/A	N/A	N/A	✔	✔	✘	✘	✘	✘	✘
AC1000MS	3.20	✔	N/A	N/A	N/A	✔	✔	✘	✘	✘	✘	✘
QX300	3.20	✔	N/A	N/A	N/A	✔	✔	✘	✘	✘	✘	✘

Sangoma Information

Provisioning method

TFTP only, HTTP not possible as Sangoma devices do not support username and password.

Sangoma devices

Filenames:

cfgMAC

Supported features

Model	Firmware	Basic	Time/Date	HTTP Directory	Directory/BLF	UAD General Template	UAD Template (extension)	Preffered Codec	DHCP Settings	HTTP Provisioning	Hot Desking
S500	2.0.4	✔	✔	✘	✘	✔	✔	✔	✔	✘	✘
S505	3.0.4	✔	✔	✘	✘	✔	✔	✔	✔	✘	✘
S700	2.0.4	✔	✔	✘	✘	✔	✔	✔	✔	✘	✘
S705	3.0.4	✔	✔	✘	✘	✔	✔	✔	✔	✘	✘

Next -> 27. Account Settings

@@ Line 257: / Line 257: @@
 [[image:yealink920-small.jpg|link=Yealink_CP920|CP920]]
 [[image:cp860-small.jpg|link=Yealink_CP860|CP860]]
+[[image:yealink-w70b-small.jpeg|link=Yealink_W70B|W70B]]
 '''Filename'''
@@ Line 1,019: / Line 1,020: @@
 | W60B
 | 77.83.0.25
+| <span style="color: green;">✔</span>
+| <span style="color: orange;">★</span>
+| <span style="color: green;">✔</span>
+| <span style="color: green;">✔</span>
+| N/A
+| <span style="color: green;">✔</span>
+| <span style="color: green;">✔</span>
+| <span style="color: red;">✘</span>
+| <span style="color: green;">✔</span>
+| <span style="color: green;">✔</span>
+| <span style="color: green;">✔</span>
+| <span style="color: green;">✔</span>
+|-style="font-size:85%;text-align:center;background-color:#ffffff;" |
+| W70B
+| 146.85.0.20
 | <span style="color: green;">✔</span>
 | <span style="color: orange;">★</span>
@@ Line 1,134: / Line 1,150: @@
 ==='''Polycom devices'''===
+[[image:c60-small.jpeg|link=Poly_Trio_C60_Conference_phone]]
 [[image:vvx1500-small.jpg|link=UAD_Polycom_VVX1500_user_manual|VVX 1500]]
 [[image:vvx600-small.jpg|link=UAD_Polycom_VVX600_user_manual|VVX 600]]
@@ Line 1,387: / Line 1,404: @@
 | <span style="color: green;">✔</span>
 | <span style="color: green;">✔</span>
+| <span style="color: green;">✔</span>
+| <span style="color: red;">✘</span>
+| <span style="color: green;">✔</span>
+| <span style="color: green;">✔</span>
+| <span style="color: green;">✔</span>
+| <span style="color: green;">✔</span>
+| <span style="color: green;">✔</span>
+| <span style="color: green;">✔</span>
+| <span style="color: green;">✔</span>
+|-style="font-size:85%;text-align:center;background-color:#ffffff;" |
+|-style="font-size:85%;text-align:center;background-color:#ffffff;" |
+| Poly Trio C60
+| 7.2.0.12361
+| <span style="color: green;">✔</span>
+| <span style="color: green;">✔</span>
+| <span style="color: red;">✘</span>
 | <span style="color: green;">✔</span>
 | <span style="color: red;">✘</span>
@@ Line 4,197: / Line 4,230: @@
 [[image:fanvilx5-small.png|link=Fanvil_X5S|Fanvil X5S]]
 [[image:x4-small.jpg|link=Fanvil_X4G|Fanvil X4G]]
+[[image:x4u-small.jpeg|link=Fanvil_X4U|Fanvil X4U]]
 [[image:x4-small.jpg|link=Fanvil_X4|Fanvil X4]]
 [[image:fanvilx3-small.jpg|link=Fanvil_X3SP|Fanvil X3SP]]
@@ Line 4,330: / Line 4,364: @@
 | <span style="color: red;">✘</span>
 |-style="font-size:85%;text-align:center;background-color:#ffffff;" |
+| X4U
+| 2.4.3
+| <span style="color: green;">✔</span>
+| <span style="color: green;">✔</span>
+| <span style="color: green;">✔</span>
+| <span style="color: green;">✔</span>
+| <span style="color: green;">✔</span>
+| <span style="color: green;">✔</span>
+| <span style="color: green;">✔</span>
+| <span style="color: green;">✔</span>
+| <span style="color: green;">✔</span>
+| <span style="color: red;">✘</span>
+| <span style="color: red;">✘</span>
+|-style="font-size:85%;text-align:center;background-color:#ffffff;" |
 | X5S
 | 0.9.0

Difference between revisions of "Business 6 Dynamic Auto Provisioning"

From Bicom Systems Wiki

Revision as of 09:39, 19 January 2022

Contents

General information

HTTP server

MAC configuration files

Testing with curl

Testing with wget

Test HTTPS mode

HTTP response codes

HTTP logs

Syslog

Yealink Information

Provisioning method

Yealink devices

Supported features

Firmware v70

Known issues

Polycom Information

Provisioning method

Polycom devices

Supported features

General UAD config

Cisco/Linksys Information

Supported features

Grandstream Information

Provisioning method

Grandstream devices

Supported features

Obihai Information

Provisioning Method

Obihai devices

Supported features

VTech Information

Provisioning Method

VTech devices

Supported features

HTek Information

Provisioning Method

Htek devices

Supported features

Denwa Information

Provisioning Method

Denwa devices

Supported features

Mitel Information

Provisioning method

Mitel devices

Supported features

Gigaset Information

Provisioning method

Gigaset devices

Supported features

Snom Information

Provisioning Method

Snom devices

Supported features

Huawei Information

Provisioning Method

Huawei devices

Supported features

Fanvil Information

Provisioning Method

Fanvil devices

Supported features

Panasonic Information

Provisioning Method

Panasonic devices

Supported features

Alcatel Information

Provisioning Method

Alcatel devices

Supported features

Aastra Information

Provisioning method

Aastra devices

Supported features

ReadyNet devices

Provisioning method