Fanvil X4U

From Bicom Systems Wiki

Introduction

Fanvil X4U User Guide

This Configuration Guide is written as a general guide on how to configure the Fanvil phone model X4U to work with PBXware 5.3.9.

Video Tutorial

Please refer to the video tutorial explaining setting up Auto Provisioning for Fanvil on PBXware 5.

Requirements

Identifying Phone Model

To start and successfully complete the registration of the Fanvil phone, users need to know which phone model to set up.

On the back of each Fanvil phone, there is model information that you should check. Although various phone models can have exactly the same requirements and installation procedures, they can also have significantly different requirements and installation procedures, so that is why it is important to know the model you own which results in you setting up the device successfully.

Phone Firmware

  • Make sure that the phone is loaded with an appropriate firmware version, 2.4.3.
  • To find out the firmware version of the Fanvil phone model, open a new browser window and enter the phone's IP address in order to access the phone's web administration interface login screen. Example: http://192.168.1.22.
  • Log in to the phone's web administration interface with a username and password. Please note that factory default login details are as follows: username is admin and password is admin.

DHCP Server

Fully configured and operational DHCP server.

PBXware Version

PBXware version 5.3.9

In order to find out the PBXware version:

  • Log in to PBXware
  • Navigate to Settings: About.

On the top of About page, you may see a code similar to this one PBXware Edition: Multi-Tenant Release: 5.3.9.0 (41a4f0e6) Running: 13.23.1-gc-2e09fa3d, Proxy v5.3.9 (231c5f3), API: 5.3, libmemcached version: 1.0.18, where Release denotes the current version of your PBXware.