View source for Remote Directory

Remote directory is a very useful feature when a phone does not have speed dial buttons or expansion module. This Configuration Guide is written as general guide on how to enable and configure Remote Directory through provisioning.

=Requirements=

To use Remote Directory, phone must be provisioned. To find out more info on how to provision a phone, check our Provisioning Guide:
[[PBXware 5.0 End Points]]

=Configuration=

==Enable Remote Directory==

To enable Remote Directory follow these steps:

* Go to Settings -> Servers, or Settings -> Tenants and click '''Edit''' option.

* Click '''Show Advanced Options'''

* In the '''General Settings''' section set '''Show Directory in OSC''' to '''Yes'''

[[image:settings-remote-directory.jpg|image|Directory settings]] 

* Click '''Save''' button at the bottom of the page.

* Reboot the phone and open Directory menu on the phone. Remote directory should be displayed.

==Remove phone number from Directory==

I one wants to remove a phone number, for example 103 from Remote Directory, this feature must be disabled in the extension settings for this phone number:

* Go to '''Extensions''' and click '''Edit''' option on the extension 103

* Click '''Show Advanced Options'''

* In the '''General Settings''' section set '''Show in Directory''' to '''No'''

[[image:extension-disable-directory.jpg|image|Extension settings]] 

* Click '''Save''' button.

* Reboot the phone and open Directory menu on the phone. Extension 103 should be removed from the list.