Remote Directory

From Bicom Systems Wiki

Revision as of 10:35, 18 March 2020 by Dino Mesic (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Remote Directory

Remote directory is a very useful feature when a phone does not have speed dial buttons or expansion module. This Configuration Guide is written as general guide on how to enable and configure Remote Directory through provisioning.

Requirements

To use Remote Directory, phone must be provisioned. To find out more info on how to provision a phone, check our Provisioning Guide: PBXware 5.3 End Points

Configuration

Enable Remote Directory

To enable Remote Directory follow these steps:

  • Go to Settings -> Servers, or Settings -> Tenants and click Edit option.
  • Click Show Advanced Options
  • In the General Settings section set Show Directory in OSC to Yes

Directory settings

  • Click Save button at the bottom of the page.
  • Reboot the phone and open Directory menu on the phone. Remote directory should be displayed.

Remove phone number from Directory

If one wants to remove a phone number, for example 103 from Remote Directory, this feature must be disabled in the extension settings for this phone number:

  • Go to Extensions and click Edit option on the extension 103
  • Click Show Advanced Options
  • In the General Settings section set Show in Directory to No

Extension settings

  • Click Save button.
  • Reboot the phone and open Directory menu on the phone. Extension 103 should be removed from the list.