Difference between revisions of "SERVERware how to upgrade"

From Bicom Systems Wiki

(SERVERware 4.x)
(SERVERware 3.x)
Line 26: Line 26:
 
Some upgrades require "core-system upgrade", for example upgrade from SERVERware 1.x to 3.x. This procedure must be done under the supervision of support engineers. Please contact your Account Manager for details.'
 
Some upgrades require "core-system upgrade", for example upgrade from SERVERware 1.x to 3.x. This procedure must be done under the supervision of support engineers. Please contact your Account Manager for details.'
 
</span>
 
</span>
 +
 +
If the SERVERware require core system upgrade on the '''upgrade''' tab you will have the message that sayust core system upgrade required!!
 +
 +
Example:
 +
 +
[[File:core-sys.png|800px]]
  
 
== SERVERware 3.x Minor upgrade ==
 
== SERVERware 3.x Minor upgrade ==

Revision as of 10:59, 6 May 2021

Upgrading SERVERware consist of two parts: upgrade of the operating system per each host (core system upgrade) and upgrade of SERVERware software by GUI.


SERVERware 4.x


Some upgrades require "core-system upgrade", for example upgrade from SERVERware 3.x to 4.x. This procedure must be done under the supervision of support engineers. Please contact your Account Manager for details.'

If the SERVERware require core system upgrade on the upgrade tab you will have the message that sayust core system upgrade required!!

Example:

core-sys.png

SERVERware 4.x Minor upgrade

For upgrade version 4.0 to 4.x should be easily done from the GUI, following the guide from this link:

SERVERware 4.0 upgrade to 4.x how to

SERVERware 3.x


Some upgrades require "core-system upgrade", for example upgrade from SERVERware 1.x to 3.x. This procedure must be done under the supervision of support engineers. Please contact your Account Manager for details.'

If the SERVERware require core system upgrade on the upgrade tab you will have the message that sayust core system upgrade required!!

Example:

core-sys.png

SERVERware 3.x Minor upgrade

For upgrade version 3.0 to 3.x should be easily done from the GUI, following the guide from this link:

SERVERware 3.0 upgrade to 3.x how to