View source for UAD Aastra 53i

='''How to use Aastra 53i with PBXware'''= 

[[image:clip00001.jpg|thumb|Aastra 53i]] 


This "How to" is written as general guide on how to use Aastra 53i with PBXware using SIP Version 2.2 Aastra 53i firmware. It covers the most common tasks that are required to have your Aastra 53i working efficiently. 


='''Registering Aastra 53i'''= 

=='''Requirements'''== 

'''1. Aastra 53i''' firmware.
 
- Make sure that the device is loaded with <span style="color: red;">'''SIP Version 2.2'''</span> firmware.
 
2. DHCP server.
 
- Fully configured and operational DHCP server. 


=='''Manual Configuration'''== 

==='''UAD Settings'''===

'''STEP ONE:''' PBXware IP address.
 
1. Find out the IP address of PBXware server.
 
'''STEP TWO:''' Login into PBXware.
 
1. Open a new browser window and enter the IP address followed by "/admin/index.php" in order to access the PBXware administration interface login screen.
 
'''Example:''' http://192.168.1.2/admin/index.php 


[[image:clip0003.jpg|thumb|UAD Settings]] 
<span style="color: red;">'''an example with IP address following by "/admin/index.php" '''</span> 

2. Hit "Enter" on your keyboard.
 
3. Login into PBXware with your e-mail address and password. 

[[image:clip0004.jpg|thumb|UAD Settings]] 

'''STEP THREE:''' UAD status.
 
1. Make sure the UAD is enabled. To check the UAD status, navigate to "Settings:UAD", and click on the "edit" icon corresponding to "Aastra 53i". 


[[image:clip00005.jpg|thumb|UAD Settings]] 

2. Make sure "Status" is set to "active", "Auto provisioning" is set to "No", and "DHCP" is set to "Yes". 

[[image:clip00006.jpg|thumb|UAD Settings]] 

3. Click on "Save" to save changes. 



==='''Creating Extension'''=== 

'''STEP ONE:''' Add Extension.
 
1. Navigate to "Extensions". Click on "Add Extension". 

[[image:clip00007.jpg|thumb|Creating Extension]] 

2. The standard options window will be shown below. 

[[image:clip00008.jpg|thumb|Creating Extension/Extensions Add]] 

3. Select Aastra 53i from "UAD" select box.
 
4. Select Location: "Local" or "Remote".
:'''Note:'''

:-"Local" is for all extensions registered on LAN.

:-"Remote" is for all extensions registered from remote networks, WAN, Internet etc.


[[image:clip00009.jpg|thumb|Creating Extension/Extensions Add]] 

5. Click on "Next".
 
'''STEP TWO:''' Extension values.
 
1. Enter values into required field text boxes.

:<span style="color: red;">'''REQUIRED FIELDS:'''</span>
 
:'''Name:'''

Enter a name for the extension being created. '''Example:''' John Smith.
 

'''E-mail:'''

Enter the e-mail address associated with this extension. This e-mail address will receive all system notification messages. '''Example:''' john@domain.com. 


[[image:clip000010.jpg|thumb|Creating Extension/Extensions Add]] 
<span style="color: red;">'''an example with details filled in'''</span>  

2. Click on "Save". 

[[image:clip000011.jpg|thumb|Creating Extension/Extensions Edit]] 
<span style="color: red;">'''an example with details filled in'''</span> 

3. Click on "Save & E-mail". Account details will be sent to the e-mail address associated with this extension.
 
'''OPTIONAL FIELDS:'''

'''Extension:''' 

An auto-generated extension number based on the next available sequential number. An extension value can be changed. '''Example:''' 1000.


'''Username:''' 

The username is auto generated/populated and cannot be changed since it allows the system to use this value for other important operations.

 
'''Secret:''' 

A secret value associated with the UAD is auto-generated in order to allow the UAD to successfully register with the system. The secret value can be changed.

 
'''PIN:''' 

An auto-generated PIN will allow access to voicemail and online self care. 



==='''Registering Phone'''=== 

'''STEP ONE:''' Electricity and Ethernet.
 
- Make sure to properly connect your Aastra 53i to the electricity network using a '''power adapter''' or '''passive power over ethernet injector.'''
 
- Connect the ethernet port to a hub, router or switch to access LAN.

<span style="color: red;">'''Please Note:'''</span> For information and instruction on how to connect your Aastra 53i to the electricity network and ethernet, check manufacturer documentation on their web site www.aastra.com. 
 
After successfully connecting your Aastra 53i to the electricity and data networks it is time to register it to PBXware.
 
'''STEP TWO:''' Aastra 53i IP address.
 
Find out the IP address of the Aastra 53i connected to network.
 
1. Press the button with the "i" sign.
 
2. Select "Option list" from the menu.
 
3. Select "Phone status".
 
4. Select "IP & MAC addresses" option.
 
5. The IP address of your PBXware displays in the "IP Address" field.
 
'''STEP THREE:''' Aastra 53i Web Interface.
 
1. Open a new browser window and enter the IP address in order to access Aastra 53i administration interface.

:'''Example:''' http://192.168.1.101/ 

[[image:clip0013.jpg|thumb|Registering Phone]] 
<span style="color: red;">'''an example with IP address'''</span> 

2. Hit "Enter" on your keyboard.
 
3. Login to the Aastra 53i Web Interface. You'll be prompted to enter  a username and password. The factory default username is lower case "admin" and password is "22222".
 
'''STEP FOUR:''' Configuring Aastra 53i.
 
1. Click on "Line 1" link. 

[[image:clip0014.jpg|thumb|Registering Phone]] 

2. Enter following details into the respective fields.
 
:<span style="color: red;">'''REQUIRED FIELDS:'''</span>

:'''Phone Number''' 

PBXware extension number. '''Example:''' 1000


:'''Authentication Name''' 

Usually the same number as "Phone Number".

 
:'''Password''' 

The Secret of the extension as received in the e-mail associated with this extension. '''Example:''' 3dX3r5 

 
:'''Proxy Server''' 

IP address of PBXware server. '''Example:''' 192.168.1.2

 
:'''Proxy Port'''
5060
 

:'''Registrar Server''' 

IP address of PBXware server. Example: 192.168.1.2  

 
:'''Registrar Port''' 
5060 


[[image:clip0015.jpg|thumb|Registering Phone]] 
<span style="color: red;">'''an example with details filled in'''</span> 

:'''OPTIONAL FIELDS:'''

:'''Screen Name''' 

'''Example:''' John Smith


:'''Other fields'''
Other "options" or "fields" should be left blank or as is by default, they do not have importance for registering Aastra 53i to PBXware.
 
3. Click on "Save Settings".
 
4. Click on "Reset" link. 


[[image:clip0016.jpg|thumb|Registering Phone]] 

5. Click on the "Restart" button to restart your Aastra 53i so the changes take effect.
 
- Conclusion: If everything is done as above described you should have successfully registered Aastra 53i to PBXware. Dial <span style="color: red;">'''*123'''</span> to verify registration.
 
- For further information, please contact the manufacturer or check their web site www.aastra.com.


=='''Auto Provisioning'''== 

==='''UAD Settings'''=== 

'''STEP ONE:''' PBXware IP address.
 
1. Find out the IP address of the PBXware server.
 
'''STEP TWO:''' Login to PBXware.

1. Open a new browser window and enter the IP address followed by "/admin/index.php" in order to access the PBXware administration interface login screen.

'''Example:''' http://192.168.1.2/admin/index.php 

[[image:clip0003.jpg|thumb|UAD Settings]] 
<span style="color: red;">'''an example with IP address following by "/admin/index.php" '''</span>  

2. Hit "Enter" on your keyboard.
 
3. Login to PBXware with your e-mail address and password.

[[image:clip0004.jpg|thumb|UAD Settings]] 

'''STEP THREE:''' UAD status.
 
1. Make sure the UAD is enabled. To check the UAD status, navigate to "Settings:UAD", and click on the "edit" icon corresponding to "Aastra 53i". 

[[image:clip00005.jpg|thumb|UAD Settings]] 

2. Make sure "Status" is set to "active", "Auto provisioning" is set to "Yes", and "DHCP" is set to "Yes". 

[[image:clip00018.jpg|thumb|UAD Settings]] 

3. Click on "Save" to save changes. 


==='''Creating Extension'''=== 

'''STEP ONE:''' Add Extension.
 
1. Navigate to "Extensions". Click on "Add Extension". 


[[image:clip00007.jpg|thumb|Creating Extension]] 

2. The standard options window will be shown below. 

[[image:clip00008.jpg|thumb|Creating Extension/Extensions Add]] 

3. Select Aastra 53i from "UAD" select box.
 
4. Select Location: "Local" or "Remote".
 
:'''Note:'''

:-"Local" is for all extensions registered on LAN.

:-"Remote" is for all extensions registered from remote networks, WAN, Internet etc. 


[[image:clip00009.jpg|thumb|Creating Extension/Extensions Add]] 


5. Click on "Next".
'''STEP TWO:''' Extension values.
1. Enter values into the required field text boxes.
:<span style="color: red;">'''REQUIRED FIELDS:'''</span>
 
:'''Name:'''

:Enter a name for the extension being created. '''Example:''' John Smith.


:'''E-mail:''' 

Enter the e-mail address associated with this extension. This e-mail address will receive all system notification messages. '''Example:''' john@domain.com.

 
:'''Auto provisioning:''' 

Set to "Yes".

 
'''MAC Address:''' 

Aastra 53i MAC address. '''Example:''' 001646f5f797


[[image:clip.00019.jpg|thumb|Creating Extension]] 
<span style="color: red;">'''an example with details filled in'''</span> 


2. Click on "Save". 


[[image:clip0020.jpg|thumb|Creating Extension]] 
<span style="color: red;">'''an example with details filled in'''</span> 


3. Click on "Save & E-mail". Account details will be sent to the e-mail address associated with this extension.
 
:'''OPTIONAL FIELDS:'''

 
:'''Extension:''' 

:An auto-generated extension number based on the next available sequential number. An extension value can be changed. Example: 1000.


:'''Username:''' 

:The username is auto generated/populated and cannot be changed since it allows the system to use this value for other important operations.
 

:'''Secret:''' 

:A secret value associated with the UAD is auto-generated in order to allow the UAD to successfully register with the system. The secret value can be changed.
 

:'''PIN:''' 

:An auto-generated PIN will allow access to voicemail and online self care.


==='''Registering Phone'''=== 

'''STEP ONE:''' Electricity and Ethernet.
 
- Make sure to properly connect your Aastra 53i to the electricity network using a '''power adapter''' or '''passive power over ethernet injector.'''
 
- Connect the ethernet port to a hub, router or switch to access LAN.
 
<span style="color: red;">'''Please Note:'''</span> For information and instruction on how to connect your Aastra 53i to the electricity network and ethernet, check manufacturer documentation on their web site www.aastra.com. 
 
After successfully connecting your Aastra 53i to the electricity and data networks, it is time to register it to PBXware.
 
'''STEP TWO:''' Aastra 53i IP address.
 
Find out the IP address of the Aastra 53i connected to network.
 
1. Press the button with the "i" sign.
 
2. Select "Option list" from the menu.
 
3. Select "Phone status".
 
4. Select "IP & MAC addresses" option.
 
5. The IP address of your PBXware displays in the "IP Address" field.
 
'''STEP THREE:''' Aastra 53i Web Interface.
 
1. Open a new browser window and enter the IP address in order to access Aastra 53i administration interface.
 
'''Example:''' http://192.168.1.101/

[[image:clip0013.jpg|thumb|Registering Phone]] 
<span style="color: red;">'''an example with IP address'''</span> 

2. Hit "Enter" on your keyboard.
 
3. Login to the Aastra 53i Web Interface. You'll be prompted to enter a username and password. The factory default username is lower case "admin" and password is "22222".
 
'''STEP FOUR:'''  Configuring TFTP server.
 
1. Click on "Configuration Server" link. 


[[image:clip0022.jpg|thumb|Registering Phone]] 
<span style="color: red;">'''an example with details filled in'''</span> 

2. "TFTP Server" must be set with TFTP server value. '''Example:''' 192.168.1.2
 
3. Click on "Save Settings".
 
4. Click on "Reset" link. 

[[image:clip0016.jpg|thumb|Registering Phone]] 

5. Click on the "Restart" button to restart your Aastra 53i so the changes take effect.


=='''Auto Configuration'''== 

==='''Requirements'''=== 

1. Make sure your devices are properly connected to the same LAN as your PBXware.
2. Ensure that all devices are set to factory defaults.
 
3. Ensure that all devices are using port 5060. 


==='''Auto Configuration'''=== 

1. Navigate to "Extensions: Find Phones".

[[image:clip0023.jpg|thumb|Auto Configuration]]

2. A pop up window will appear. Input range of IP addresses
 

:Example:

:- Start IP: 192.168.1.2

:- End IP: 192.168.1.254
 

3. Click on "Start". PBXware will search for devices connected to the same LAN in the selected range of IP addresses. 

[[image:clip0024.jpg|thumb|Auto Configuration]]
<span style="color: red;">'''an example with range of IP addresses'''</span> 

4. After the PBXware has finished searching for devices, a list of all devices found will be shown.
 
5. Change the activation status from "Not Activated" to "Auto Configuration" for one or more displayed devices of your choice.
 
6. Click on the "edit" button next to the activation select box to enter properties for the selected device. 

[[image:clip0025.aastra53i.jpg|thumb|Auto Configuration]] 
<span style="color: red;">'''an example with list of found devices'''</span> 

7. After you have edited a device, a pop up window will appear. 


[[image:clip0026.aastra53i.jpg|thumb|Auto Configuration]] 
<span style="color: red;">'''an example with 4 configured lines'''</span> 

8. The Aastra 53i has 4 lines available, you can configure just one or all of them as shown above.
 
'''Line 1 example'''
 
Name: John Smith

E-mail: john@domain.com

Ext: 1000

PIN: 1223

 
Secret: Enter at least 6 digits or letter long secret.
 
9. Click on "Save", entered values will be saved and the pop up window will disappear.
 
10. Click on the "Save" button shown below to finalize the "Auto Configuration". 

[[image:clip0027.aastra53i.jpg|thumb|Auto Configuration]] 

11. Your device(s) will automatically reboot and be auto configured. 


='''Paging'''= 

1. Navigate your Internet browser to the phone's IP address (for example http://192.168.1.1).
 
2. Select "Preferences" under the "Basic Settings" tab. 

[[image:clip0029.jpg|thumb|Paging]]


3. Make sure that
 
:Auto-Answer box is checked.
:Microphone Mute box is not checked. 

[[image:clip0030.jpg|thumb|Paging]] 

4. Navigate to the bottom of the page and click on "Save Settings". 

[[image:clip0031.jpg|thumb|Paging]] 

5. Reboot the phone to apply the new settings.
 
<span style="color: red;">'''NOTE:'''</span> At the time, the paging option is set for all lines and works once the handset is picked up. Paging tested with Firmware version 1.3.1.1095.


='''Glossary'''= 
 
'''- DHCP =''' Dynamic Host Configuration Protocol (DHCP) is a communications protocol that allows network administrators to manage and automate the assignment of Internet.

'''- HUB =''' A common connection point for devices in a network.

'''- IP Address = Internet Protocol address.

'''- Local =''' A local area network (LAN) is a computer network covering a local area, like a home, office, or small group of buildings such as a college.

'''- LAN =''' Local Area Network.

'''- PIN =''' Personal Identification Number.

'''- Remote =''' Network devices that are managed or controlled from a network system other than the system to which they are directly connected.

'''- Router =''' A device that forwards data packets from one local area network (LAN) or wide area network (WAN) to another.

'''- Switch =''' Network device that selects a path or circuit for sending a unit of data to its next destination.

'''- UAD =''' User Agent Device.

'''- VoiceMail =''' The electronic transmission of voice messages over the Internet. The messages are stored on a computer until the recipient accesses and listens to them.

'''- WAN =''' Wide Area Network.

'''- Web Interface =''' A web interface is the system of controls with which the user controls a device.