Difference between revisions of "UAD Aastra 53i"

From Bicom Systems Wiki

(Created page with "# [http://wiki.bicomsystems.com/UAD_Aastra_53i_Introduction Introduction] # [http://wiki.bicomsystems.com/UAD_Aastra_53i_Registering_Aastra_53i Registering Aastra 53i] # [http...")
 
Line 1: Line 1:
# [http://wiki.bicomsystems.com/UAD_Aastra_53i_Introduction Introduction]
+
='''How to use Aastra 53i with PBXware'''=
# [http://wiki.bicomsystems.com/UAD_Aastra_53i_Registering_Aastra_53i Registering Aastra 53i]
+
 
# [http://wiki.bicomsystems.com/UAD_Aastra_53i_Paging Paging]
+
[[image:clip00001.jpg|thumb|Aastra 53i]]
# [http://wiki.bicomsystems.com/UAD_Aastra_53i_Glossary Glossary]
+
 
 +
 
 +
This "How to" is written as general guide on how to use Aastra 53i with PBXware using SIP Version 2.2 Aastra 53i firmware. It covers the most common tasks that are required to have your Aastra 53i working efficiently.
 +
 
 +
 
 +
='''Registering Aastra 53i'''=
 +
 
 +
=='''Requirements'''==
 +
 
 +
'''1. Aastra 53i''' firmware.
 +
 +
- Make sure that the device is loaded with <span style="color: red;">'''SIP Version 2.2'''</span> firmware.
 +
 +
2. DHCP server.
 +
 +
- Fully configured and operational DHCP server.
 +
 
 +
 
 +
=='''Manual Configuration'''==
 +
 
 +
==='''UAD Settings'''===
 +
 
 +
'''STEP ONE:''' PBXware IP address.
 +
 +
1. Find out the IP address of PBXware server.
 +
 +
'''STEP TWO:''' Login into PBXware.
 +
 +
1. Open a new browser window and enter the IP address followed by "/admin/index.php" in order to access the PBXware administration interface login screen.
 +
 +
'''Example:''' http://192.168.1.2/admin/index.php
 +
 
 +
 
 +
[[image:clip0003.jpg|thumb|UAD Settings]]
 +
<span style="color: red;">'''an example with IP address following by "/admin/index.php" '''</span>
 +
 
 +
2. Hit "Enter" on your keyboard.
 +
 +
3. Login into PBXware with your e-mail address and password.
 +
 
 +
[[image:clip0004.jpg|thumb|UAD Settings]]
 +
 
 +
'''STEP THREE:''' UAD status.
 +
 +
1. Make sure the UAD is enabled. To check the UAD status, navigate to "Settings:UAD", and click on the "edit" icon corresponding to "Aastra 53i".
 +
 
 +
 
 +
[[image:clip00005.jpg|thumb|UAD Settings]]  
 +
 
 +
2. Make sure "Status" is set to "active", "Auto provisioning" is set to "No", and "DHCP" is set to "Yes".
 +
 
 +
[[image:clip00006.jpg|thumb|UAD Settings]]
 +
 
 +
3. Click on "Save" to save changes.
 +
 
 +
 
 +
 
 +
==='''Creating Extension'''===
 +
 
 +
'''STEP ONE:''' Add Extension.
 +
 +
1. Navigate to "Extensions". Click on "Add Extension".
 +
 
 +
[[image:clip00007.jpg|thumb|Creating Extension]]
 +
 
 +
2. The standard options window will be shown below.
 +
 
 +
[[image:clip00008.jpg|thumb|Creating Extension/Extensions Add]]
 +
 
 +
3. Select Aastra 53i from "UAD" select box.
 +
 +
4. Select Location: "Local" or "Remote".
 +
:'''Note:'''
 +
 
 +
:-"Local" is for all extensions registered on LAN.
 +
 
 +
:-"Remote" is for all extensions registered from remote networks, WAN, Internet etc.
 +
 
 +
 
 +
[[image:clip00009.jpg|thumb|Creating Extension/Extensions Add]]
 +
 
 +
5. Click on "Next".
 +
 +
'''STEP TWO:''' Extension values.
 +
 +
1. Enter values into required field text boxes.
 +
 
 +
:<span style="color: red;">'''REQUIRED FIELDS:'''</span>
 +
 +
:'''Name:'''
 +
 
 +
Enter a name for the extension being created. '''Example:''' John Smith.
 +
 +
 
 +
'''E-mail:'''
 +
 
 +
Enter the e-mail address associated with this extension. This e-mail address will receive all system notification messages. '''Example:''' john@domain.com.
 +
 
 +
 
 +
[[image:clip000010.jpg|thumb|Creating Extension/Extensions Add]]  
 +
<span style="color: red;">'''an example with details filled in'''</span> 
 +
 
 +
2. Click on "Save".
 +
 
 +
[[image:clip000011.jpg|thumb|Creating Extension/Extensions Edit]]
 +
<span style="color: red;">'''an example with details filled in'''</span>
 +
 
 +
3. Click on "Save & E-mail". Account details will be sent to the e-mail address associated with this extension.
 +
 +
'''OPTIONAL FIELDS:'''
 +
 
 +
'''Extension:'''
 +
 
 +
An auto-generated extension number based on the next available sequential number. An extension value can be changed. '''Example:''' 1000.
 +
 
 +
 
 +
'''Username:'''
 +
 
 +
The username is auto generated/populated and cannot be changed since it allows the system to use this value for other important operations.
 +
 
 +
 +
'''Secret:'''
 +
 
 +
A secret value associated with the UAD is auto-generated in order to allow the UAD to successfully register with the system. The secret value can be changed.
 +
 
 +
 +
'''PIN:'''
 +
 
 +
An auto-generated PIN will allow access to voicemail and online self care.
 +
 
 +
 
 +
 
 +
==='''Registering Phone'''===
 +
 
 +
'''STEP ONE:''' Electricity and Ethernet.
 +
 +
- Make sure to properly connect your Aastra 53i to the electricity network using a '''power adapter''' or '''passive power over ethernet injector.'''
 +
 +
- Connect the ethernet port to a hub, router or switch to access LAN.
 +
 
 +
<span style="color: red;">'''Please Note:'''</span> For information and instruction on how to connect your Aastra 53i to the electricity network and ethernet, check manufacturer documentation on their web site www.aastra.com.
 +
 +
After successfully connecting your Aastra 53i to the electricity and data networks it is time to register it to PBXware.
 +
 +
'''STEP TWO:''' Aastra 53i IP address.
 +
 +
Find out the IP address of the Aastra 53i connected to network.
 +
 +
1. Press the button with the "i" sign.
 +
 +
2. Select "Option list" from the menu.
 +
 +
3. Select "Phone status".
 +
 +
4. Select "IP & MAC addresses" option.
 +
 +
5. The IP address of your PBXware displays in the "IP Address" field.
 +
 +
'''STEP THREE:''' Aastra 53i Web Interface.
 +
 +
1. Open a new browser window and enter the IP address in order to access Aastra 53i administration interface.
 +
 
 +
:'''Example:''' http://192.168.1.101/
 +
 
 +
[[image:clip0013.jpg|thumb|Registering Phone]]
 +
<span style="color: red;">'''an example with IP address'''</span>
 +
 
 +
2. Hit "Enter" on your keyboard.
 +
 +
3. Login to the Aastra 53i Web Interface. You'll be prompted to enter  a username and password. The factory default username is lower case "admin" and password is "22222".
 +
 +
'''STEP FOUR:''' Configuring Aastra 53i.
 +
 +
1. Click on "Line 1" link.
 +
 
 +
[[image:clip0014.jpg|thumb|Registering Phone]]
 +
 
 +
2. Enter following details into the respective fields.
 +
 +
:<span style="color: red;">'''REQUIRED FIELDS:'''</span>
 +
 
 +
:'''Phone Number'''
 +
 
 +
PBXware extension number. '''Example:''' 1000
 +
 
 +
 
 +
:'''Authentication Name'''
 +
 
 +
Usually the same number as "Phone Number".
 +
 
 +
 +
:'''Password'''
 +
 
 +
The Secret of the extension as received in the e-mail associated with this extension. '''Example:''' 3dX3r5
 +
 
 +
 +
:'''Proxy Server'''
 +
 
 +
IP address of PBXware server. '''Example:''' 192.168.1.2
 +
 
 +
 +
:'''Proxy Port'''
 +
5060
 +
 +
 
 +
:'''Registrar Server'''
 +
 
 +
IP address of PBXware server. Example: 192.168.1.2 
 +
 
 +
 +
:'''Registrar Port'''
 +
5060
 +
 
 +
 
 +
[[image:clip0015.jpg|thumb|Registering Phone]]
 +
<span style="color: red;">'''an example with details filled in'''</span>
 +
 
 +
:'''OPTIONAL FIELDS:'''
 +
 
 +
:'''Screen Name'''
 +
 
 +
'''Example:''' John Smith
 +
 
 +
 
 +
:'''Other fields'''
 +
Other "options" or "fields" should be left blank or as is by default, they do not have importance for registering Aastra 53i to PBXware.
 +
 +
3. Click on "Save Settings".
 +
 +
4. Click on "Reset" link.
 +
 
 +
 
 +
[[image:clip0016.jpg|thumb|Registering Phone]]
 +
 
 +
5. Click on the "Restart" button to restart your Aastra 53i so the changes take effect.
 +
 +
- Conclusion: If everything is done as above described you should have successfully registered Aastra 53i to PBXware. Dial <span style="color: red;">'''*123'''</span> to verify registration.
 +
 +
- For further information, please contact the manufacturer or check their web site www.aastra.com.

Revision as of 13:59, 2 September 2013

How to use Aastra 53i with PBXware

Aastra 53i


This "How to" is written as general guide on how to use Aastra 53i with PBXware using SIP Version 2.2 Aastra 53i firmware. It covers the most common tasks that are required to have your Aastra 53i working efficiently.


Registering Aastra 53i

Requirements

1. Aastra 53i firmware.

- Make sure that the device is loaded with SIP Version 2.2 firmware.

2. DHCP server.

- Fully configured and operational DHCP server.


Manual Configuration

UAD Settings

STEP ONE: PBXware IP address.

1. Find out the IP address of PBXware server.

STEP TWO: Login into PBXware.

1. Open a new browser window and enter the IP address followed by "/admin/index.php" in order to access the PBXware administration interface login screen.

Example: http://192.168.1.2/admin/index.php


UAD Settings

an example with IP address following by "/admin/index.php"

2. Hit "Enter" on your keyboard.

3. Login into PBXware with your e-mail address and password.

UAD Settings

STEP THREE: UAD status.

1. Make sure the UAD is enabled. To check the UAD status, navigate to "Settings:UAD", and click on the "edit" icon corresponding to "Aastra 53i".


UAD Settings

2. Make sure "Status" is set to "active", "Auto provisioning" is set to "No", and "DHCP" is set to "Yes".

UAD Settings

3. Click on "Save" to save changes.


Creating Extension

STEP ONE: Add Extension.

1. Navigate to "Extensions". Click on "Add Extension".

Creating Extension

2. The standard options window will be shown below.

Creating Extension/Extensions Add

3. Select Aastra 53i from "UAD" select box.

4. Select Location: "Local" or "Remote".

Note:
-"Local" is for all extensions registered on LAN.
-"Remote" is for all extensions registered from remote networks, WAN, Internet etc.


Creating Extension/Extensions Add

5. Click on "Next".

STEP TWO: Extension values.

1. Enter values into required field text boxes.

REQUIRED FIELDS:
Name:

Enter a name for the extension being created. Example: John Smith.


E-mail:

Enter the e-mail address associated with this extension. This e-mail address will receive all system notification messages. Example: john@domain.com.


Creating Extension/Extensions Add

an example with details filled in

2. Click on "Save".

Creating Extension/Extensions Edit

an example with details filled in

3. Click on "Save & E-mail". Account details will be sent to the e-mail address associated with this extension.

OPTIONAL FIELDS:

Extension:

An auto-generated extension number based on the next available sequential number. An extension value can be changed. Example: 1000.


Username:

The username is auto generated/populated and cannot be changed since it allows the system to use this value for other important operations.


Secret:

A secret value associated with the UAD is auto-generated in order to allow the UAD to successfully register with the system. The secret value can be changed.


PIN:

An auto-generated PIN will allow access to voicemail and online self care.


Registering Phone

STEP ONE: Electricity and Ethernet.

- Make sure to properly connect your Aastra 53i to the electricity network using a power adapter or passive power over ethernet injector.

- Connect the ethernet port to a hub, router or switch to access LAN.

Please Note: For information and instruction on how to connect your Aastra 53i to the electricity network and ethernet, check manufacturer documentation on their web site www.aastra.com.

After successfully connecting your Aastra 53i to the electricity and data networks it is time to register it to PBXware.

STEP TWO: Aastra 53i IP address.

Find out the IP address of the Aastra 53i connected to network.

1. Press the button with the "i" sign.

2. Select "Option list" from the menu.

3. Select "Phone status".

4. Select "IP & MAC addresses" option.

5. The IP address of your PBXware displays in the "IP Address" field.

STEP THREE: Aastra 53i Web Interface.

1. Open a new browser window and enter the IP address in order to access Aastra 53i administration interface.

Example: http://192.168.1.101/
Registering Phone

an example with IP address

2. Hit "Enter" on your keyboard.

3. Login to the Aastra 53i Web Interface. You'll be prompted to enter a username and password. The factory default username is lower case "admin" and password is "22222".

STEP FOUR: Configuring Aastra 53i.

1. Click on "Line 1" link.

Registering Phone

2. Enter following details into the respective fields.

REQUIRED FIELDS:
Phone Number

PBXware extension number. Example: 1000


Authentication Name

Usually the same number as "Phone Number".


Password

The Secret of the extension as received in the e-mail associated with this extension. Example: 3dX3r5


Proxy Server

IP address of PBXware server. Example: 192.168.1.2


Proxy Port

5060


Registrar Server

IP address of PBXware server. Example: 192.168.1.2


Registrar Port

5060


Registering Phone

an example with details filled in

OPTIONAL FIELDS:
Screen Name

Example: John Smith


Other fields

Other "options" or "fields" should be left blank or as is by default, they do not have importance for registering Aastra 53i to PBXware.

3. Click on "Save Settings".

4. Click on "Reset" link.


Registering Phone

5. Click on the "Restart" button to restart your Aastra 53i so the changes take effect.

- Conclusion: If everything is done as above described you should have successfully registered Aastra 53i to PBXware. Dial *123 to verify registration.

- For further information, please contact the manufacturer or check their web site www.aastra.com.